How To Set The Clock - Honda CBR 929RR / 954RR / 1000RR

ConqSoft · 06-19-2005, 4:43 PM

Submitted by: HondaGalToo

Mine works best by pushing the right button just a fraction of a second before the left. The manual says to press the left control button while pressing the right control button. When in set mode, the minute display will start flashing. To set the time: The clock will alternate between the hour and minute adjust modes each time the left control button is pressed. Press the right control button until the desired time and "am" or "pm" is displayed. When done, wait approximately 10 seconds until the display stops flashing. You're done!

lshybrid195 · 12-08-2005, 12:59 PM

Quote:

Originally Posted by ConqSoft

Submitted by: HondaGalToo

Mine works best by pushing the right button just a fraction of a second before the left. The manual says to press the left control button while pressing the right control button. When in set mode, the minute display will start flashing. To set the time: The clock will alternate between the hour and minute adjust modes each time the left control button is pressed. Press the right control button until the desired time and "am" or "pm" is displayed. When done, wait approximately 10 seconds until the display stops flashing. You're done!

I use the same method as you stated above, at first i try reading the owner manual on how to set the clock but it didnt help me out, until i sat there and mess around with it for 15 min then i got it down.

Chekman · 01-31-2006, 1:01 PM

Thanks very much!
Got tired of pushing damn buttons!

9two9rider · 08-26-2006, 7:47 PM

It's funny how someone posts the info up on here... and all this time I've been randomly pushing and holding until I get the right time!

oakley · 08-27-2006, 12:26 PM

Stupid clock took me like 3 days to get it set..

Mad-Pad · 04-16-2007, 11:18 PM

Thank You, Thank You, Thank You

I found this site when I had Googled and was trying to figure out how to set the clock on my 929 now I'm a member. What more can I say.

FB1000inPA · 01-30-2008, 3:24 PM

And there I thought I am the only one who has problems with setting the time. Sheesh, now I feel better.

Thanks for sharing.

HondaGalToo · 01-30-2008, 4:14 PM

You're welcome!

Twincam · 01-30-2008, 4:30 PM

When i first got my 954RR and my VFR800, it took me ages to figure out how to do it, i might have driven myself mad, turning on the ignition, starting it, turning it off, pressing the buttons until one day, i managed to do it.

mike turner · 02-19-2008, 10:58 PM

do not bother with clock what so ever, it is right half the year and an hour out the other half....so why bother, not as if we really want to get anywhere fast or worry about the time we are on the bike.

FireBlade02 · 03-04-2008, 10:15 AM

HAHA!.. I've had my 954 for almost a year now and never figured it out.. I unhooked the battery and waited til one oclock..
seemed like the easiest thing to do.. at least at that time.. I got tired of pushing buttons

Twincam · 03-04-2008, 11:46 AM

Quote:

Originally Posted by FireBlade02

HAHA!.. I've had my 954 for almost a year now and never figured it out.. I unhooked the battery and waited til one oclock..
seemed like the easiest thing to do.. at least at that time.. I got tired of pushing buttons

Sounds like something i would have done...

slickwill · 03-04-2008, 1:28 PM

My manual explained it pretty clearly on my F4i? It is the exact same process except the buttons are stacked top and bottom rather than left and right.

werideyamaha492 · 03-10-2008, 4:04 PM

thanks i needed the help!

blue89turbo · 03-27-2008, 9:55 PM

Thanks for this!

I just got my bike last week and the clock is flashing even the po said he gave up on tying to set the *)*+^ clock LOL

sunnyboy · 05-13-2008, 5:41 AM

uffffffff i was real tired bloody settin the time since months i got my blade,thanx to u guys :-)_

RojerLockless · 05-22-2008, 6:43 PM

wow anyone ever just RTFM?

Twincam · 05-22-2008, 7:48 PM

Quote:

Originally Posted by RojerLockless

wow anyone ever just RTFM?

Haha, that would have been the easier thing to do - but half of us dont own a manual and the other half who do havent opened it

RTFM = "Read The F#?%$!/Flaming Manual"

lophuker · 05-24-2008, 2:28 PM

i have a 2000 929 works perfect, just replaced the battery, i have no issues with the bike other then the clock, I can set the time go for a ride, shut the bike off and when i start it again it resets, any ideas?

Doomwitha929 · 06-15-2008, 1:31 AM

How about changing the temp from C to F?

Twincam · 06-15-2008, 3:27 AM

Quote:

Originally Posted by lophuker

i have a 2000 929 works perfect, just replaced the battery, i have no issues with the bike other then the clock, I can set the time go for a ride, shut the bike off and when i start it again it resets, any ideas?

When you set the clock, do you allow for the clock to set and stop flashing? If yes, then you have a problem with the power going to the clocks when you turn the ignition off. I take it that the trip gets reset too?

Quote:

Originally Posted by Doomwitha929

How about changing the temp from C to F?

Mine only does C

Doomwitha929 · 06-15-2008, 2:07 PM

Hmm maybe hey only do C. Thats gonna suck. I dont want to think about the conversion everytime I want to know what temp its at.

Twincam · 06-15-2008, 2:31 PM

Quote:

Originally Posted by Doomwitha929

Hmm maybe hey only do C. Thats gonna suck. I dont want to think about the conversion everytime I want to know what temp its at.

Some clocks can change between KPH and MPH like mine, but mine doesn't do anything with the degrees. Ive seen some clocks locked on KPH and i would guess that some are locked on MPH.

pradervr · 06-24-2008, 5:54 PM

I just not even going to bother with mine--hell the bike was an ebay special that I bought off of a stunter for $400 dollars and I am setting it up for a track bike. Owners manual???? I dont have one.

Doomwitha929 · 07-04-2008, 11:01 PM

The other day my temp guage changed to F. I have no idea what I did but its on F now. If someone figures it out let me know.

Twincam · 07-07-2008, 8:16 AM

Quote:

Originally Posted by Doomwitha929

The other day my temp guage changed to F. I have no idea what I did but its on F now. If someone figures it out let me know.

Toggle with the buttons, mine changes from MPH to KPH, but not sure if the temp display changes...

Tony929 · 07-13-2008, 9:59 PM

I though i was going MAD! but i wasn't at least i'm not the only who couldn't work it out!

Thanx great help

brandon_9_9 · 08-21-2008, 6:45 PM

Quote:

Originally Posted by Doomwitha929

The other day my temp guage changed to F. I have no idea what I did but its on F now. If someone figures it out let me know.

mine did the exact same. any ideas why? or how to go back to C

Red Rider · 08-21-2008, 8:22 PM

Push and hold the right button (I think!).

DragonRider · 08-21-2008, 8:53 PM

Press and hold the right button toggles between F/C and MPH/Kilometers

TO changet he clock, press and hold both buttons at the same time, fiddle with the buttons to get the time right, then leave it alone and it will stop blinking and hold the time...