gsp/power commander combo idea

mark2119 · 12-18-2008, 1:52 AM

Being the electronics junkie i am, I just cant help but think of a good reason why this cant be done. Lets say you have a power commander like device in the tail and a gps device on the steering dampener. A few modifications should let you set up a communications link between the two devices. GPS software could send new fuel maps to the p/c on demand. The GPS could also be configured to give you real time stats and let you know how your maps are working. I have yet to pull the trigger on buying either the GPS or p/c but I would defiantly be game for a rig like this.

lanbrown · 12-18-2008, 12:43 PM

GPS is just for location, it has nothing to do with actual communications.

mark2119 · 12-18-2008, 7:06 PM

I beg to differ, there are plenty of gps units that are multifunction. There are units that have mp3/satellite/fm/traffic radio players, internal bluetooth capabilities, voice recognition software, basic serial port functions and the list goes on and on. The trickiest part would be the embedded software on the gps itself (damn proprietary laws).

Dynojettech · 12-18-2008, 8:06 PM

The power commander does not have any kind of wireless communication ability.

mark2119 · 12-18-2008, 9:28 PM

Good point Dynojettech, thats why in my original post I stated using a "power commander like device". A wireless link would make the install a breeze, but I fear a good old serial data link would be more reliable.

mark2119 · 12-18-2008, 9:51 PM

Just out of curiosity Dynojettech, do you work for Dynojet or are you a tuner?

lanbrown · 12-18-2008, 10:55 PM

Quote:

Originally Posted by mark2119

I beg to differ, there are plenty of gps units that are multifunction.

Then it is just not a GPS unit then. You can buy a BT GPS receiver; all it does is GPS functions. You then use map software on another device to see where you are.

mark2119 · 12-19-2008, 12:18 AM

There is also the possibility of using the LCD of the multifunction gps receiver/street mapper/mp3 player/device all in one plastic housing as a rear camera monitor.

dicknose · 12-19-2008, 4:05 AM

You can do this sort of thing with a Palm - there was a setup to read obdii (the car equivalent) info to a palm and display info.
I guess now you probably better off with something like an iPhone/iTouch.

I guess the point lanbrown was making was you are using the gps feature - just the display/controls.

lanbrown · 12-19-2008, 12:51 PM

Quote:

Originally Posted by mark2119

There is also the possibility of using the LCD of the multifunction gps receiver/street mapper/mp3 player/device all in one plastic housing as a rear camera monitor.

You are going about it ALL wrong. Try a Palm device and then add GPS to it.
http://www.powercommander.com/palmmanual.shtml
'
So rather than trying to reinvent the wheel, use the one that is already made.