FS: Brembo 19x20 MC and SS lines - RC51

southpark460 · 12-26-2005, 7:09 PM

Selling my Brembo 19x20 cast Brake Master Cylinder, Galfer SS front brake lines, and Goodridge SS rear brake line. Will include banjos with the front lines. Lines are for the SP1 RC. All have very low miles are in great shape.

Brembo 19x20 Brake MC - $130

Galfer clear SS front lines - SOLD!

Goodridge smoke SS rear line - SOLD!

CBR Riding Fool · 12-27-2005, 2:54 AM

will the master also fit a 929???? Very interested.

southpark460 · 12-27-2005, 9:32 AM

Quote:

Originally Posted by CBR Riding Fool

will the master also fit a 929???? Very interested.

I know it'll bolt up, but I don't know what the recommended bore/stroke is on the 929. Most bikes are 19x18 or 19x20, so it "should" work. But you'll definitely want to check. Too much leverage, and you're going over the bars!

HondaGalToo · 12-27-2005, 10:10 AM

Quote:

Originally Posted by southpark460

I know it'll bolt up, but I don't know what the recommended bore/stroke is on the 929. Most bikes are 19x18 or 19x20, so it "should" work. But you'll definitely want to check. Too much leverage, and you're going over the bars!

I have the 19x18 on my 929, as recommended by Dan Kyle, but I see no reason why the 19x20 shouldn't work also. The differences, I think, are in lever travel and feel. Those are the only 2 sizes I'd use. The others are for different set-ups, i.e. rotor only on one side and such.

Nickelii · 12-27-2005, 10:51 AM

I have a 19x20 on my 929, it works, you can never have "too much levarage"

CBR Riding Fool · 12-27-2005, 4:52 PM

Isn't it. 19x20 less travel, more power, less modulation. the 19x18 more travel, better feel and modulation?

NomadRip · 12-27-2005, 9:48 PM

Brembo recommends the 19x20 for pushing 12 pistons, and the 19x18 for pushing 8 (4-piston calipers). I haven't tried the 19x20, but it's a bit too powerful. I've heard it described as an "on/off switch", with less feel.

CBR Riding Fool · 12-27-2005, 10:02 PM

Quote:

Originally Posted by NomadRip

Brembo recommends the 19x20 for pushing 12 pistons, and the 19x18 for pushing 8 (4-piston calipers). I haven't tried the 19x20, but it's a bit too powerful. I've heard it described as an "on/off switch", with less feel.