929 and 954 parts

karls · 07-14-2007, 5:02 PM

My 954 part out thread was getting a little long and difficult to tell what parts were still available, so I though I would start a new topic with the addition of a few parts.

Toby stearing damper - $200 - Sold
Dan Kyle pair block off plates - $25
Rear wheel - $150 (previous owner polished one side) (954 wheel is lighter than 929)
(1) Rear axle - $15
Rear Shock - $50
Forks stock - $200 Sale pending
Rear brake master cylinder, braided SS line, caliper - $75
Stator cover powder coated black $50
Clutch cover powder coated black $50
Clutch cover - $50
Stator cover polished, small scratches from drop - $30
Stator - $50
Reg/Rectifier used - $20
Spark plug coils - $60 (all four)
Throttle bodies - $100
Head with cams valve cover- $75
Water pump - $35
Starter - $35
Air box, flapper removed - $20
Servo Motor - $10
Complete wire harness - $115
ECU - $75

PP Tuning keyless gas cap $50
Swingarm (small scrape from stand) $200 (nice upgrade for 929 guys)
Red/black gas tank no dents/dings - $250 Sale pending

RK X-ring 520 chain conversion, less than 300 miles on chain, brand new 43T vortex rear sprocket, 16T vortex front sprocket, 15T Driven front sprocket - $150 Sale pending

Stock rearset, right side (missing brake lever) - $20
Left and right fairings, some rash, cracks - $75
Fairing inner panels - $45 (pair)
Intake covers, left clean, right cracked - $35 (pair) Sale pending
Stock rear hugger - $30
Stock turn signals - $15 for three
Seat - $30
Kickstand (no sidestand switch) - $10

All parts are OBO and plus actual shipping from 32246

1wicked281 · 07-14-2007, 10:42 PM

Hey there, I'm in need of a new chain, but I'm not quite sure if I really need the stuff your offer. What will this chain and sprockets change? Do you know what the stock chain specs are for the 954? Thanks I may be interested in the steering dampener also. Never heard of Toby before, Any good?

karls · 07-15-2007, 5:58 AM

Stock chain specs for a 954 are 16T front 43T rear - 530. The 520 chain is a lighter weight chain, and is the x-ring style chain. To use the 520 chain you need to change the front and rear sprockets to the 520 size.

The Toby steering damper is very good. Completely rebuildable, adjustable, CNC machined brackets.

karls · 07-15-2007, 6:42 AM

info on Toby dampers

Toby motorcycle steering dampers

Toby steering dampers are designed with an expansion valve/chamber which automatically compensates for changes in oil temperature. This gives a consistent dampening action under changes in temperature due to atmospheric conditions and racing use.
To provide optimal control in a wide range of riding conditions, the Toby Damper offers 25 adjustments. These adjustments will suit any riding style.
Each kit is specifically designed for particular sport bikes. The attention to detail in the design and construction of mounting brackets is second to none.
All Toby steering dampers are completely re-buildable.
The Toby Steering Damper is the lightest offered. The 290 mm damper (with bracket) weighs 12 ounces

Toby steering damper body's are made from lightweight aluminum avional 22. The internal surface is micro polished by ballizing and hard anodized to provide the most consistent and long lasting slide surface.
The rod end is aluminum Ergal 65 and is self-lubricating.
Both caps feature anti dust PTFE seals to protect against atmospheric conditions.
All steel and aluminum pieces are treated for anti-oxidation.
The piston and set rods are built with chrome steel material C45 with a roughness RA=+. 15
All mounting hardware is machined aluminum avional 22.
The arm joints are self lubricating and are polished after anodizing.

Bryce Auten · 07-15-2007, 11:18 AM

is the toby dampner off a 929?? If so i want

1wicked281 · 07-15-2007, 11:39 AM

would you be will to take 100 for the chain and sprockets?

karls · 07-15-2007, 12:21 PM

PM sent on the Toby damper and chain/sprockets

brian's929 · 07-15-2007, 12:52 PM

will the gas tank fit a 929

karls · 07-15-2007, 1:38 PM

Sorry,, but no the 954 tank will not fit the 929 (well I'm sure you could with enough modification).

karls · 07-17-2007, 2:49 PM

Note for anybody interested in parts - I will be out of town and unable to access a computer between the 18th and 23rd. I will respond to any inquiry on the 24th.

Thanks!

sammae01 · 07-20-2007, 9:46 AM

Quote:

Originally Posted by karls

Note for anybody interested in parts - I will be out of town and unable to access a computer between the 18th and 23rd. I will respond to any inquiry on the 24th.

Thanks!

hmm 18-24? are you gonna be in CA for MotoGP? I received everything, It was exactly as advertised. GREAT GREAT packaging. I was overwhelmed with the amount of peanuts.

to you sir
Thanks alot

hotnanas · 07-20-2007, 10:04 AM

Quote:

Originally Posted by sammae01

hmm 18-24? are you gonna be in CA for MotoGP? I received everything, It was exactly as advertised. GREAT GREAT packaging. I was overwhelmed with the amount of peanuts.

to you sir
Thanks alot

yes, he packages like a madman. I unpacked my box at work, and tried to repack it before I left for home...i don't know how he got everything in that box so neatly with so much bubble wrap!

i'd definately buy from him again!

btw karls...these PP rearsets, i'm assuming you ran normal shifting? can they be used for gp shifting? i really haven't looked at them and I may be wrong.

teamneon · 07-21-2007, 3:53 PM

sent email on tank...waiting for you to return home to respond.

karls · 07-24-2007, 7:40 AM

Back in town

and will respond to all messages!

Went to Laguna for the Moto GP, great time. Not the results I would have liked to see, really sorry to see Hopper and Hayden get together early in the race. Weather was really nice this year, not like the blast furnace heat wave last year.

The PP tuning rearsets are standard shift only.

Sorry, both tanks have sold. I will update the list a little later today with parts still available.

filodefuego · 07-24-2007, 9:13 AM

have a rad for sale????

karls · 07-24-2007, 11:36 AM

Sorry, radiator has sold already

karls · 07-25-2007, 8:24 AM

Updated list!

Dan Kyle pair block off plates - $25
Rear wheel - $150 (previous owner polished one side) (954 wheel is lighter than 929)
(1) Rear axle - $15
Rear Shock - $50
Rear brake master cylinder, braided SS line, caliper - $75

Clutch cover - $50
Stator cover polished, small scratches from drop - $30
Spark plug coils - $60 (all four)
Throttle bodies - $100
Head with cams valve cover- $75
Water pump - $35
Starter - $35
Clutch basket, steels, fibers, springs - $50
Air box, flapper removed stock velocity stacks- $20
Servo Motor - $10
Complete wire harness - $115
ECU - $75

PP Tuning keyless gas cap $50 Sale pending
Swingarm with linkage(small scrape from stand) $200 (nice upgrade for 929 guys)

Left and right fairings, some rash, cracks - $75
Fairing inner panels - $45 (pair)
Stock rear hugger - $30
Stock turn signals - $15 for three
Kickstand (no sidestand switch) - $10

All prices OBO plus actual shipping from 32246

hotnanas · 07-25-2007, 12:57 PM

Quote:

Originally Posted by karls

The PP tuning rearsets are standard shift only.

dang, i have to learn how to shift all over again!

i am looking over your list again...i'm getting the bug once more...will keep ya posted.

Ol' Gravy Leg · 07-25-2007, 11:46 PM

i pm'ed you, karls. no response.

karls · 07-26-2007, 8:04 AM

Ol' Gravy Leg - sorry about that, PM sent

Ak954rr · 07-28-2007, 12:19 AM

PM sent on Reg/Stator

karls · 07-31-2007, 9:59 AM

Bump - I really don't want to put these on ebay, come on make me an offer

jasonsr1 · 07-31-2007, 2:30 PM

Hey Karl Jason here, Id be up for the rear shock, say 50 to include shipping to wa state? Oh and how many miles on it ruffly?

Thanks Jason at jasonsr1@yahoo.com

karls · 07-31-2007, 2:32 PM

Jasonsr1 - PM sent

jasonsr1 · 07-31-2007, 2:57 PM

Hey Karl PM and Email and payment sent
Thanks Jason

Ak954rr · 07-31-2007, 8:32 PM

Just wanted to drop a note saying I bought some parts from Karl the packaging was excellent, Only took two days from PM to getting the parts at my front door and im in Alaska. Don't hesitate to buy a part from him if ya need it!

sammae01 · 08-01-2007, 5:46 AM

Karl,

Can I get better pictures of the rear wheel sent to me at sammae01(at)yahoo.com I want to see the "polishing"

Thanks

karls · 08-01-2007, 6:16 AM

Sammae01 - I'll take some pics tonight and email them to you.

hotnanas · 08-01-2007, 9:07 AM

You've been PayPal'ed again by me!

PP Tuning Gas Cap and DK blockoffs are sold! Thanks Karl

hotnanas · 08-01-2007, 10:23 AM

consider the swingarm and hugger sold!

hell, you should have just sold me the 954 instead!

you are being PM'ed

I'll try to do a step-by-step writeup on the 929/954 swap...too bad this won't make my lap times better, unless not dropping the bike in the pits while putting it up on the stand count