For Sale: Sell motorcycle parts, helmets, leathers, boots, gloves, luggage, and more.
| |
PARTING OUT 01 HONDA 929 929RR
12-02-2008, 2:00 AM
|
#1 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| PARTING OUT 01 HONDA 929 929RR PARTING OUT 2001 HONDA 929 (engine sold)
FRAME WITH CLEAN & CLEAR ONTARIO OWNERSHIP $1000 no damages
UPPER & LOWER TRIPLES $95
STOCK EXHAUST $100 (couple small dings in muffler)
SWING ARM $100
REAR WHEEL $150
REAR ROTOR $20
REAR CUSH ASSEMBLY $20
COMPLETE REAR BRAKE SYSTEM WITH LIKE NEW PADS $50
COMPLETE FRONT BRAKE SYSTEM WITH 1/2 WORN PADS $80
REAR SHOCK $30
DRIVER`S REARSETS $70 EACH
RIGHT PASSENGER PEG & BRACKET ASSEMBLY MINT $40
LEFT PASSENGER PEG AND BRACKET WITH SCUFFED PEG $20
FRONT & REAR SPROCKETS LOOK GOOD $30
FUEL TANK NO DENTS $150
FUEL PUMP $75
RAD WITH FAN $150
AIR BOX $20
K&N AIR FILTER $20
THROTTLE BODIES WITH INJECTORS $75
ALL 4 COILS $40
ECU $75
HARNESS $75
STARTER $50
KICK STAND WITH SWITCH $30
FRONT ROTORS $45 FOR THE PAIR
CALL CORY 519 402 2453
ps. i`m on the border so shipping to the states or canada is no problem.
here is a link with a couple pictures PARTING OUT 2001 HONDA 929 929RR PARTS FOR SALE FRAME TANK 01 - Sarnia Motorcycles For Sale - Kijiji Sarnia |
| |
12-02-2008, 2:02 AM
|
#2 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR i forgot to mention that all of these parts came from a nice running bike which i had running on saturday. thanks, cory |
| |
12-02-2008, 10:58 AM
|
#3 |
Join Date: 11-30-2008 Location: butler, nj
Bike(s): streetfighter Posts: 80
Rep:  (10) Rep Power: 1
| Re: PARTING OUT 01 HONDA 929 929RR cost for the WHOLE front end? trips, forks, wheel, brakes, rotors |
| |
12-02-2008, 1:19 PM
|
#4 |
Join Date: 12-01-2007 Location: Mooresville nc
Bike(s): 01 929 Posts: 629
Rep:  (50) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR Any fairings or headlight? |
| |
12-02-2008, 1:52 PM
|
#5 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR i had trouble getting the triple undone. the threads got tight while trying to remove the special nut. i have seen this before on a buddy`s bike (same model) and we had to replace the lower triple. i`m throwing the lower triple in with the frame in case it can be saved but i suspect it is junk. already a deal pending on the forks. front wheel has a ding in it. calipers & rotors still available. plastics available (most damaged) shoot me your email address and shipping address and i`ll shoot you prices guys. garage is a mess i need to move this stuff. thanks, cory
headlight was trashed |
| |
12-02-2008, 7:30 PM
|
#6 | | i like to ride all the time
Join Date: 08-27-2008 Location: fontana
Bike(s): cbr 929 2001 Posts: 306
Rep:  (14) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR you got a stator or r/r |
| |
12-03-2008, 2:49 AM
|
#7 |
Join Date: 09-16-2008 Location: Lakeland, FL
Bike(s): 2001 Honda 929 Posts: 29
Rep:  (10) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR If you have a front brake master cylinder how much would you like for it. I am also interested in the tank. Zip is 33801. |
| |
12-03-2008, 8:32 AM
|
#8 |
Join Date: 05-02-2008 Location: Rochester,NY
Bike(s): 2001 cbr 929 Posts: 7
Rep:  (10) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR Do you have the attachmnt for the license plate, lights? |
| |
12-03-2008, 7:12 PM
|
#9 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR delirious-master with reservoir $50 TYD or fuel tank with master & res. $230 TYD I DID NOTICE LAST NIGHT THAT THERE IS ONE TINY DENT IN THE TANK JUST BEHIND THE TOP TRIPLE CLAMP AREA.
wassdadeal - plate holder with plate light $25 TYD
IF YOU GUYS OR ANYBODY ELSE WANT PICTURES PLEASE PM ME YOUR EMAIL. I DO NOT KNOW HOW TO POST THEM. THANKS, CORY
I also put a couple items on ebay, and will be adding more tonight. here is the link: Items for Sale by 519402bike
somebody asked about the subframe, sorry it was damaged.
kklaich-headlight & gauges damaged too.
Last edited by corybusa : 12-04-2008 at 8:44 AM.
|
| |
12-04-2008, 12:39 AM
|
#10 |
Join Date: 12-03-2008 Location: Reno
Bike(s): 00 929 Posts: 46
Rep:  (11) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR Do you have the gauges? If so how much shipped?
Thanks |
| |
12-08-2008, 10:57 AM
|
#11 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR i put a bunch more parts on ebay. link in previous post. this stuff needs to go. thanks, cory |
| |
12-09-2008, 7:52 PM
|
#12 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR PARTING OUT 2001 HONDA 929 (engine sold)
FRAME WITH CLEAN & CLEAR ONTARIO OWNERSHIP $1000 no damages
UPPER & LOWER TRIPLES throwing in with the frame
STOCK EXHAUST $100 (couple small dings in muffler)
SWING ARM $100 on ebay
REAR WHEEL $150
REAR ROTOR $20
REAR CUSH ASSEMBLY $20 on ebay
COMPLETE REAR BRAKE SYSTEM WITH LIKE NEW PADS $50 on ebay
COMPLETE FRONT BRAKE SYSTEM WITH 1/2 WORN PADS $80 on ebay
REAR SHOCK sold
DRIVER`S REARSETS sold
RIGHT PASSENGER PEG & BRACKET ASSEMBLY MINT sold
LEFT PASSENGER PEG AND BRACKET WITH SCUFFED PEG sold
FRONT & REAR SPROCKETS LOOK GOOD on ebay
FUEL TANK NO DENTS on ebay no bids no reserve starting at 99 cents
FUEL PUMP sold
RAD WITH FAN sold
AIR BOX $20
K&N AIR FILTER $20
THROTTLE BODIES WITH INJECTORS sold
ALL 4 COILS $40
ECU $75
HARNESS $75
STARTER $50
KICK STAND WITH SWITCH $30
FRONT ROTORS on ebay
CALL CORY 519 402 2453
ps. i`m on the border so shipping to the states or canada is no problem.
here is a link with a couple pictures PARTING OUT 2001 HONDA 929 929RR PARTS FOR SALE FRAME TANK 01 - Sarnia Motorcycles For Sale - Kijiji Sarnia
Last edited by corybusa : 12-14-2008 at 1:37 PM.
Reason: ITEMS SOLD, updated list
|
| |
12-14-2008, 1:40 PM
|
#13 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR bunch of parts ending on ebay tonight & tomorrow. nobody wants a tank for 99 cents? no reserve, no bids?
here is a link guys: Items for Sale by 519402bike
thanks, cory |
| |
12-16-2008, 4:12 PM
|
#14 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR Here is about all that`s left & some new prices:
FRAME WITH CLEAN & CLEAR ONTARIO OWNERSHIP $1000 no damages
UPPER & LOWER TRIPLES throwing in with the frame
LARGE PART THAT SWING ARM & FRAME BOLT TO (not sure what it`s called) $40
STOCK EXHAUST $80 (couple small dings in muffler)
SWING ARM $50
REAR WHEEL $150
REAR ROTOR $20
COMPLETE REAR BRAKE SYSTEM WITH LIKE NEW PADS $40
FUEL TANK deal pending
AIR BOX $20
K&N AIR FILTER $20
ALL 4 COILS $40
ECU $75
HARNESS $75
STARTER $50
KICK STAND WITH SWITCH $30
FRONT SEAT $40
Thanks, Cory 519 402 2453
Last edited by corybusa : 12-18-2008 at 2:46 PM.
Reason: found seat
|
| |
12-21-2008, 1:27 AM
|
#15 | | i like to ride all the time
Join Date: 08-27-2008 Location: fontana
Bike(s): cbr 929 2001 Posts: 306
Rep:  (14) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR do you have the starter switch for the controls the one thats next to the throttle that set of switches how much |
| |
12-22-2008, 9:56 AM
|
#16 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR starter switch was damaged & was thrown out. thanks, cory |
| |
12-22-2008, 5:47 PM
|
#17 | | i like to ride all the time
Join Date: 08-27-2008 Location: fontana
Bike(s): cbr 929 2001 Posts: 306
Rep:  (14) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR oh ok coo thanks do you have headlights |
| |
12-22-2008, 7:51 PM
|
#18 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR only the stuff on the list remains. thanks, cory |
| |
12-24-2008, 4:32 AM
|
#19 |
Join Date: 10-13-2008 Location: Ballinger,Tx
Bike(s): 01 Custom CBR 929, 1997 yzf 600r Age: 22 Posts: 63
Rep:  (6) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR how much would you part out just the mid pipe?shipped to 76821 |
| |
12-27-2008, 12:29 AM
|
#20 |
Join Date: 12-27-2008 Location: San Jose, CA
Posts: 3
Rep:  (10) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR Really would like to buy the triples, upper and lower. Are you dead set on selling them with the frame only?
Dan |
| |
12-27-2008, 1:03 AM
|
#21 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR hey dan
i think that if i try to get the triples undone it will wreck the threads. not the first time i have run into this on one of these bikes. that is why i`m throwing them in with the frame. not to mention whoever buys the frame will be able to see that the triples are straight which is something i prefer to see when buying a frame. thanks, cory 519 402 2453 |
| |
12-27-2008, 1:25 AM
|
#22 |
Join Date: 12-27-2008 Location: San Jose, CA
Posts: 3
Rep:  (10) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR Gotcha. Just thought I't check. Thanks! Dan |
| |
01-04-2009, 1:08 AM
|
#23 |
Join Date: 01-04-2009 Location: toronto
Posts: 3
Rep:  (10) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR phinephella@hotmail.com =>I need your gas tank. Also need price with shipping included to Toronto L4C 6P2 |
| |
02-10-2009, 5:16 PM
|
#24 |
Join Date: 10-04-2008 Location: wa
Bike(s): 2000 cbr 929 Posts: 5
Rep:  (10) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR do you have the throttle housing?
email me at gacarpino@hotmail.com |
| |
02-10-2009, 7:48 PM
|
#25 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR fuel tank was sold. i have the throttle sleeve if that is what you mean. i`ll send you an email. thanks, cory |
| |
02-17-2009, 8:10 AM
|
#26 |
Join Date: 12-03-2008 Location: Reno
Bike(s): 00 929 Posts: 46
Rep:  (11) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR how bad is the ding in the front wheel? Does it hold air? |
| |
02-17-2009, 10:51 PM
|
#27 | | i like to ride all the time
Join Date: 08-27-2008 Location: fontana
Bike(s): cbr 929 2001 Posts: 306
Rep:  (14) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR do you have the stator |
| |
02-17-2009, 11:02 PM
|
#28 |
Join Date: 12-11-2007 Location: SOUTHERN ONTARIO
Bike(s): BUSA Posts: 72
Rep:  (11) Rep Power: 2
| Re: PARTING OUT 01 HONDA 929 929RR how bad is the ding in the front wheel? Does it hold air?
it holds air but i think it is likely also bent. i`ll double check it, i`ll pm you the results. the rear is fine.
do you have the stator?
stator went with engine.
midpipe sold & shipped.
thanks, cory |
| |
02-22-2009, 11:12 PM
|
#29 |
Join Date: 12-03-2008 Location: Reno
Bike(s): 00 929 Posts: 46
Rep:  (11) Rep Power: 0
| Re: PARTING OUT 01 HONDA 929 929RR Have you checked the front wheel yet? I also need a rear foot brake petal if you have one. |
| |
Copyright © 2006 FireBlades.org. All Rights Reserved. FireBlades.org is not affiliated with, nor endorsed by, any motorcycle manufacturers.
Best viewed at a resolution of 1024x768 or higher. SEO by vBSEO ©2007, Crawlability, Inc.
All times are GMT -4. The time now is 2:43 AM.
|