929 Gilles Tooling FO One Triple Clamps

sdca7718 · 10-24-2009, 5:45 PM

I have a brand new never mounted set of triple clamps from Gilles Tooling. They are adjustable offset triples that can be changed very easily. I was going to do the 929 front end on my 600rr but decided to go another route. These are $1150-1200 on most sites, looking for $700 shipped in the US.
http://i99.photobucket.com/albums/l2...DSC_0088-1.jpg

Look at the detail in their machining:
http://i99.photobucket.com/albums/l2...5/DSC_0093.jpg

sdca7718 · 11-01-2009, 2:45 AM

Forgot to mention this fits the 954 also.

929ADAM · 11-06-2009, 1:57 AM

so this is stemmed for a 929?? i see the bottom is boltless?? how do you tighten it?

sdca7718 · 11-06-2009, 2:33 AM

Yes this is for the 929. The lower clamps use a spanner nut wrench included with the triples. Here is a link to OPP Racing that shows what the clamp looks like:
Products - Gilles Tooling Triple Clamps F.O. ONE - OPPRACING

Here is their site which talks about them:
- gillestooling -

929ADAM · 11-06-2009, 9:29 PM

these are in mint condition never mounted correct?

sdca7718 · 11-06-2009, 10:31 PM

Yes, I was going to do the 929 front end on my 600 but changed my mind. They have been taken out of the nice case they come in a couple of times but never mounted. They are definitly mint, new in box.

929ADAM · 11-06-2009, 11:01 PM

600 shipped to 01462? tried to pm you but no go.

sdca7718 · 11-06-2009, 11:42 PM

That is too low with Paypal fees and shipping. This is listed at $1150 or more on every site I have seen, you are offering half that amount. I can't take that much off, I'm already out more than $450 with the price I'm asking.

red929 · 11-06-2009, 11:44 PM

Are these the standard offset or one of the optional offsets?

sdca7718 · 11-06-2009, 11:52 PM

They come with the standard, which can be flipped around to another offset. The offset kits provide two offsets by simply turning the eccentric around.

929ADAM · 11-07-2009, 12:53 AM

you have an email?

adam { @ } customfighters { . } com

sdca7718 · 11-07-2009, 12:54 AM

same as my name on here, @yahoo.

929ADAM · 11-08-2009, 12:49 AM

beautiful piece. very trick. good luck with the sale. great price too.

red929 · 11-10-2009, 1:08 AM

pm sent

sdca7718 · 11-10-2009, 1:31 AM

Just to let others know, I'm not looking at lowering the price. The regular price for these is $1150. I haved taken 39% off that out of pocket. So I am losing $450 on these. If you want new, never mounted triples for a great price, let me know.

You can see some great pics of the 1000rr with Gilles Tooling triples on OPP Racing: Gilles Tooling Triple Clamps System - Honda CBR 1000RR 04-07 images and photos - OPPRACING

red929 · 11-13-2009, 9:51 PM

The problem is this isn't really a bang-for-the-buck mod. I'd love to have 'em, but wheels would make more sense. If you change your mind my offer stands. I can pay you via PayPal immediately. Let me know.

JohnnySpeed954 · 11-13-2009, 10:58 PM

So what does it take to make them fit the 954? Anything or is it a direct swap as well?

These might be a nice little trick add on piece for my project.

sdca7718 · 11-13-2009, 11:00 PM

They are a direct bolt on. The Gilles site lists them as the same part number.

-Z- · 11-18-2009, 5:27 AM

Man...I honestly think that your asking price is an awesome deal! I'd jump all over this except I'm trying to go a slightly different route with my bike. Good luck with the sale though!