Help!!!! Trying to change my spark plugs!!!

kain929 · 12-25-2007, 11:23 AM

Can anyone tell me how to remove the intake air duct on an 05 blade. I am trying to change the spark plugs and I can't get this thing off. I have followed the directions in the manual to the letter and I still can't get the thing to move more than an inch. Is there something else holding the air duct in place that the manual don't cover.

rokitt51 · 12-29-2007, 5:13 PM

You need to check for more screws that need to be taken out for removal it sounds like. Havent worked on a new blade, but that is how it is with the 54 so i figure it would be the same for the newer blades.

ezekiel808 · 12-29-2007, 6:48 PM

keep lookin around the intake, you must be missing a bolt or two.

kain929 · 12-29-2007, 8:53 PM

Thanks guys but I figured out what was going on with it. I had to go in from the top and remove the airbox so that I could unhook the intake from the airbox. the manual don't tell you that the intake duct is a two piece apparatus.