| Home | Forums | Marketplace | Articles | FAQ | Members | Gallery | Arcade |
Honda FireBlade: Discussion of the Honda CBR 900RR, Honda CBR 929RR, Honda CBR 954RR, and Honda CBR 1000RR Motorcycles. | |||||||
11-07-2007, 6:01 AM
| | |
| Join Date: 01-15-2007 Location: Perth, Western Australia
Bike(s): Between Bikes Posts: 4
Rep:  (10) Rep Power: 0
| Pipe recommedations for 2007 CBR1000RR Hi all, Just after some recommendations for a pipe for an 07 blade. Mainly after sound and looks rather than increased HP. Thanks Darren. | |
|      |
|
11-08-2007, 8:18 AM
| |
| Join Date: 05-01-2006 Location: south georgia
Bike(s): gsxr1k Posts: 10
Rep: (10) Rep Power: 0
| Re: Pipe recommedations for 2007 CBR1000RR I installed a Micron carbon fiber on my 06 yesterday. The install was simple and it had good directions. It sounds awesome. Alot louder than stock and it has a great low growl to it. |
|
| |
|
11-14-2007, 2:29 AM
| |
| Join Date: 03-13-2007 Location: Brisbane, Australia
Bike(s): Honda CBR 1000 RR FireBlade 2006 Posts: 4
Rep: (10) Rep Power: 0
| Re: Pipe recommedations for 2007 CBR1000RR I've been thinking about this myself. I cannot make up my mind between a Honda CBR-1000RR 06+ SLIP-ON MUH89U 06+ Honda CBR-1000RR stainless oval twin outlet $499.95 "Twin Outlet" http://photos.micronexhaust.com/phot...1D-2sm.jpg.jpg or AKRAPOVIC SLIP - ON EXHAUST SYSTEM for the HONDA CBR 1000 RR (2006) http://www.akrapovic.net/typo3conf/e...0339ff2eb2.jpg I am really liking that slip on from Micron. |
|
| |
|
11-16-2007, 3:10 AM
| |
| Join Date: 09-29-2007 Location: South Jersey
Bike(s): 2007 CBR1000RR Posts: 27
Rep: (10) Rep Power: 0
| Re: Pipe recommedations for 2007 CBR1000RR I'm going to go with the Akrapovic Hex when I do my exhaust. |
|
| |
|
11-16-2007, 4:02 AM
| |
  Join Date: 04-16-2007 Location: South Africa
Bike(s): CBR10RR8, BMWK1200S Posts: 126
Rep: (19) Rep Power: 2
| Re: Pipe recommedations for 2007 CBR1000RR I have the Akrapo Hex Ti (carbon tip). Cosmetics are beautiful – more or less same fitment as stock in other words does not extend past tail piece of the bike, quality is of the best in the business and the sound is nice – no too loud yet a lot different from stock. I’m very happy. If there is interest, I’ll post some pictures over the weekend
__________________ RESPECT THE POWER 1 JAP and 1 GERMAN |
|
| |
|
11-16-2007, 4:06 AM
| | |
| Join Date: 03-13-2007 Location: Brisbane, Australia
Bike(s): Honda CBR 1000 RR FireBlade 2006 Posts: 4
Rep: (10) Rep Power: 0
| Re: Pipe recommedations for 2007 CBR1000RR Quote:
I'd like to see a few photos mate, I am more interested in the a) sound b)looks than anything else. I have seen too many ugly (imo) Yoshimura pipes just stick out and look out of place... | |
|
| |
|
11-23-2007, 4:28 AM
| |
| Join Date: 09-29-2007 Location: South Jersey
Bike(s): 2007 CBR1000RR Posts: 27
Rep: (10) Rep Power: 0
| Re: Pipe recommedations for 2007 CBR1000RR Post them up, I don't want a really loud pipe and from what I've been reading Akra sounds good and not overly loud. |
|
| |
|
11-23-2007, 8:43 AM
| |
| Join Date: 04-16-2007 Location: South Africa
Bike(s): CBR10RR8, BMWK1200S Posts: 126
Rep: (19) Rep Power: 2
| Re: Pipe recommedations for 2007 CBR1000RR Apologies guys, I completely forgot. I guess better late than never
__________________ RESPECT THE POWER 1 JAP and 1 GERMAN |
|
| |
|
11-23-2007, 9:57 AM
| |
 Join Date: 10-30-2007 Location: Albuquerque
Bike(s): 2007 Honda CBR1000RR & 1992 Honda CBR600F2 Posts: 250
Rep: (10) Rep Power: 1
| Re: Pipe recommedations for 2007 CBR1000RR Great pics. Who manufactured the under tail kit you installed? I have been looking to replace the bulky stock set up. Thanks |
|
| |
|
11-23-2007, 11:22 AM
| |
| Join Date: 04-16-2007 Location: South Africa
Bike(s): CBR10RR8, BMWK1200S Posts: 126
Rep: (19) Rep Power: 2
| Re: Pipe recommedations for 2007 CBR1000RR Thanks It is a Puig product Motoplastic - PUIG (Honda - CBR1000RR - Metalic tuning - Licence supports)
__________________ RESPECT THE POWER 1 JAP and 1 GERMAN Last edited by MadnohB : 11-23-2007 at 11:35 AM. |
|
| |
|
11-23-2007, 12:21 PM
| |
| Join Date: 10-30-2007 Location: Albuquerque
Bike(s): 2007 Honda CBR1000RR & 1992 Honda CBR600F2 Posts: 250
Rep: (10) Rep Power: 1
| Re: Pipe recommedations for 2007 CBR1000RR I found it online at Kneedraggers.com. Thanks for the tip. That is the best looking license support that I have seen |
|
| |
|
11-25-2007, 4:42 PM
| |
   Join Date: 08-05-2007 Location: KY
Bike(s): 2008CBR1000RR, 2007 CBR 1000RR, 2007 ZX-14 Age: 38 Posts: 1,233
Rep: (69) Rep Power: 3
| Re: Pipe recommedations for 2007 CBR1000RR   I had this yoshi before I went with sato.. The yoshi sounded and looked great but the performance was better on the sato.. |
|
| |
| Top |
Copyright © 2006 FireBlades.org. All Rights Reserved. FireBlades.org is not affiliated with, nor endorsed by, any motorcycle manufacturers.
Best viewed at a resolution of 1024x768 or higher. SEO by vBSEO ©2007, Crawlability, Inc. All times are GMT -4. The time now is 11:05 AM.
Best viewed at a resolution of 1024x768 or higher. SEO by vBSEO ©2007, Crawlability, Inc. All times are GMT -4. The time now is 11:05 AM.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84
Powered by vBulletin. Copyright ©2000 - 2007, Jelsoft Enterprises Ltd.