[splatty]

Went to Matlock Bath the other day and had a crowd round mine at one point. They were probably trying to work out how the rear pegs come off

I'll stay in touch via PM with the people I want to on that forum. Shame as it seemed a nice place, but like you say, once you sell the Ape they talk to you like $hit.

Funnily enough I know one of the members in Oz and he is just trying to get a white blade. They are not in Oz by standard but his dealer may get some, and then he will probably buy. I'll drop him a line and suggest he doesn't mention it..........ever

[Fireblade RR8]

Hi Mate, not been on a dyno, and cant get rid off my old image to upload a new one, have been trying too.

[Fireblade RR8]

Hi Mate, Paint job was done by dream machine.

[splatty]

Dream Machine have always done quality work

[Rich22]

Has anyone fitted that gorgeous Taylor made pipe yet or any further info on it?

[sb1000rr]

dont bother, the build quality is crap and they sound strange after a while. i had one on my k8 gixxer, ok for looks and thats about it.........

[Rich22]

Originally Posted by sb1000rr

dont bother, the build quality is crap and they sound strange after a while. i had one on my k8 gixxer, ok for looks and thats about it.........

Whats the problem with the build quality mate

[Big Kahuna]

Saw and heard the Taylormade over the weekend while at the MotoGP races. My buddy has the system on his '08. Taylormade is not crap, everything I've seen from them is top quality and the system they designed for the '08 blade is no exception. The fit and finish on the carbon is better than stock. The sound is low and rumbles at idle. After seeing what all the other manufacture offer for the '08 blade, Taylormade has really hit this one out of the park. They also make a really nice fender eliminator which they had on display at the vendor area.

YouTube - Taylormade exhaust first start

YouTube - Taylormade exhaust sound test #2

[Rich22]

Looks great mate, any dino stuff and is it with a pc111 (what bhp is the bike showing)

[Litre Kid]

Is that Jet City Racers bike?(1000rr.net) He posted his dyno numbers on the other site. No real gain on top end unless used with an ignition module (US bikes) but did show a gain on bottom end.

[sb1000rr]

Originally Posted by Rich22

Whats the problem with the build quality mate

after about 2 months of use on my gixxer the pipe started sounding funny, so i took the carbon cover off and the pipe was coming apart at the seams and all the rivets holding the pipe together were coming loose, also check out the taylor made thread on gixxer forum, to c what else can happen......

[DukeCBR2008]

Originally Posted by splatty

It is quite a nice sound mate, growls a bit as you throttle off. Pleasantly quiet at tickover, allows you to hear the diesel Honda LOL

I know a few guys who have had GP style short cans, and they have been stupidly ******* loud. I don't want that these days.

Mate, I got now a stupidly loud Yohsimura R77 Full Race System. Can just tell you its WICKED...
BikePics - dukecbr2008's 2008 Honda CBR 1000 RR Home Page on BikePics.Com

[Rich22]

Originally Posted by DukeCBR2008

Mate, I got now a stupidly loud Yohsimura R77 Full Race System. Can just tell you its WICKED...
BikePics - dukecbr2008's 2008 Honda CBR 1000 RR Home Page on BikePics.Com

Any dino graphs or sound clips mate

[DukeCBR2008]

Originally Posted by Rich22

Any dino graphs or sound clips mate

will do some sound clips tomorrow and visit my friend's store to get it hopefully dyno'd this weekend...

[Big Kahuna]

Originally Posted by Litre Kid

Is that Jet City Racers bike?(1000rr.net) He posted his dyno numbers on the other site. No real gain on top end unless used with an ignition module (US bikes) but did show a gain on bottom end.

Yes, from 1000rr.net...

Here's a shot of my buddy's bike at Laguna.

[Rich22]

Ive done it ordered a Taylormade and pc111 due mid week so fingers crossed its made as good as it looks, dino figures are quite impressive so lets see

[Razorback]

What is the latest news about the Taylormade exhaust? Any new experiences or gossip? Anyone of us that has it on the ride yet? Power increase?

[Rich22]

Yep just fitted my Taylormade and pc111 it fits great sounds massive and goes like F*** love it

[Razorback]

Looks really great!!
How would you describe the sound compared to other systems, like akra, leovince or Yoshi?

Nice looking bike!

[Rich22]

Originally Posted by Razorback

Looks really great!!
How would you describe the sound compared to other systems, like akra, leovince or Yoshi?

Nice looking bike!

It sounds pretty close to Stoners gp bike really raw i will do a sound clip although they never come out that well

[sb1000rr]

what power did it make?

[Rich22]

Putting on dino next week hopefully so will post results, this is a link to taylormade sound clip, probably a better job than i can do. http://www.racetaylormade.com/tmpage...sol_robert.mp3 it doesn't really do it justice it sounds more like a yoshi straight through system in reality

[Litre Kid]

I have seen one dyno sheet with very little top end gain but a substantial gain in lower rpm.

[KrazyRdR83]

still waiting for more graphs on the taylor made...

anyone know where to get this belly pan/fairing that around the exhaust

http://w3.bikepics.com/pics/2008%5C0...14339-full.jpg

[setanta]

Atm I cant see a reason to change the exhaust, especially as Honda claim that the mapping is really difficult, dont want to loose out for just more noise

[indyg]

Posting for the first time ...Hi to everyone here. I ordered Jardine carbon slip on for my 08 1000 rr (black on black) today for $425.00 + $20.00 shipping. I didn't want a too loud of a pipe like the two brothers. besides I like the shape of Jardine better and i think the carbon fiber look will go better with the black bike. Also it comes with the heat shield to cover the naked pipe underneath. So far the mods I've done to it are Renthal grey grips, vortex frame sliders and Bike litez undertail. Here's a pic without the Jardine slipon
http://www.fireblades.org/gallery/fi...1_original.jpg

[Stu748R]

I have put this on another thread and think it should have gone on this one instead as follows:-
Just fitted an Akrapovic evo system with PC111 and pipercross filter.It was set up with a custom map at Crescent Suzuki and did 170.45 BHP and 80.94 ft-Lbs at the wheel.There is a huge difference to the low and mid range power and torque an feels just perfect now.Have a look at the "Anyone dynoed their 08 blade " thread to look at dyno sheet.

[KrazyRdR83]

Originally Posted by KrazyRdR83

still waiting for more graphs on the taylor made...

anyone know where to get this belly pan/fairing that around the exhaust

http://w3.bikepics.com/pics/2008%5C0...14339-full.jpg

Originally Posted by indyg

Posting for the first time ...Hi to everyone here. I ordered Jardine carbon slip on for my 08 1000 rr (black on black) today for $425.00 + $20.00 shipping. I didn't want a too loud of a pipe like the two brothers. besides I like the shape of Jardine better and i think the carbon fiber look will go better with the black bike. Also it comes with the heat shield to cover the naked pipe underneath. So far the mods I've done to it are Renthal grey grips, vortex frame sliders and Bike litez undertail. Here's a pic without the Jardine slipon
http://www.fireblades.org/gallery/fi...1_original.jpg

pic of the other side of the bike?

[indyg]

here is the pic of the other side
http://www.fireblades.org/gallery/di...747&original=1