| Home | Forums | Marketplace | Articles | FAQ | Members | Gallery | Arcade |
Honda FireBlade: Discussion of the Honda CBR 900RR, Honda CBR 929RR, Honda CBR 954RR, and Honda CBR 1000RR Motorcycles. | |||||||
06-25-2008, 1:35 PM
| | |
 Join Date: 05-10-2008 Location: Vandalia, Il
Bike(s): 1993 CBR 900 RR Posts: 25
Rep:  (10) Rep Power: 0
   | front rotors the front rotors are very expensive and i think i might have found some slightly used ones for cheap. Are the rotors from the 93 900rr the same from a 98? | |
|      |
|
06-25-2008, 4:47 PM
| |
  Join Date: 11-14-2003 Location: Perth, WestOz
Bike(s): 929, 3xGSXR750 (LW&F), 98 ZX6R Age: 42 Posts: 2,189
Rep: (58) Rep Power: 7
| Re: front rotors I don't think so. EBC lists '93 as 5mmx320mm, 6xM6 bolts on 78mm PCD, 17.2mm offset, 62.2mm bore. '98 is 5mmx310mm, 6xM6 bolts on 78mm PCD, 21.1 offset, 62mm bore. If you can get the 62mm bore to squeeze onto the '93 wheel's 62.2mm centre the bolts will fit okay. You'd probably have to put a couple of washers washers under the caliper bolts to allow for the 4mm additional offset though.
__________________ Larry - '00 CBR929RR race bike. |
|
|  |
| Top |
Copyright © 2006 FireBlades.org. All Rights Reserved. FireBlades.org is not affiliated with, nor endorsed by, any motorcycle manufacturers.
Best viewed at a resolution of 1024x768 or higher. SEO by vBSEO ©2007, Crawlability, Inc. All times are GMT -4. The time now is 8:09 PM.
Best viewed at a resolution of 1024x768 or higher. SEO by vBSEO ©2007, Crawlability, Inc. All times are GMT -4. The time now is 8:09 PM.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84
Powered by vBulletin. Copyright ©2000 - 2007, Jelsoft Enterprises Ltd.