Passenger Peg eliminator

Trimmed_Jennis · 01-10-2009, 2:31 PM

I've got a question about the right passenger peg on my 954rr, i want to pull those off and was wondering if there was a pre fab part to purchase to hold the can or if someone on here has already done that and can give me a drawing or picture so i can make my own.

Let me know, thanks.

PEM-954 · 01-10-2009, 5:16 PM

Hi, you need an exhaust hanger bracket (thats what we call them in the UK) there are quite a few after market suppliers over here such as Harris or R&G Racing.
This is my R&G conversion:-

firebladeking · 01-10-2009, 6:18 PM

yip, also evotech if you like.

Honda CBR900RR Fireblade Exhaust Hanger Bracket

Trimmed_Jennis · 01-10-2009, 9:45 PM

ok, after doing a little searching i saw where Parts411 has something from Puig that'd work but it's $63

firebladeking · 01-11-2009, 6:48 AM

yeah, looking at todays exchange rate thats £40 which is about rite

gopo · 01-11-2009, 3:44 PM

Quote:

Originally Posted by Trimmed_Jennis

I've got a question about the right passenger peg on my 954rr, i want to pull those off and was wondering if there was a pre fab part to purchase to hold the can or if someone on here has already done that and can give me a drawing or picture so i can make my own.

Let me know, thanks.

Go to D2 Moto there on E-bay. Buy a GSXR hanger, cut the bottom off, and drill a new hole for strap bolt. Did it on my 929 looked great. The hanger is like $6.00 + shipping.

Bigtoe · 01-12-2009, 10:08 AM

Just take the peg off that side.