converting my 85 suzuki gs700es to nonfaringhelp?

[sparkmaster123]

hello i would like to convert my bike to a non fairing front end and round or double head lights, how hard would this be, could i just remove the fairing and light and bolt a round one just on or is there more converting i need to do, also how can i convert my forks to hold defrent handlebars, mine are bent to far back, i want ones that go strait out or close to like a motorcross bike,

[Twincam]

It depends on how the handle bars attach to the forks now - are they clip ons or are there two brackets holding a bar in the middle?

Removing the fairing is easy, but don't forget it might be hiding such things as the coolant bottle and loads of ugly wiring. You may need to fabricate a bracket to attach the new headlamp but it shouldn't be too hard if you are not scared of lifting a few spanners etc.

[sparkmaster123]

well here is the pic of the bike. fairing is ugly. and i want twin headlights. and also would like to replace the bars. can kindof see them hear. they are attached to the forks seperatly, two small metal peaces attached to two small weard shaped clamps. its pretty weard. i want mx bars darnit, and smaller, nicer sounding exsaust.

[Twincam]

There is a way of being able to clamp bars onto your bike instead of clip - ons but you will need to attach clamps some how. (I think people weld the clamps onto the top of the forks but you will have to do some research regarding that)

The top fairing should come off easily but I believe the indicators would be attached to it (so maybe a new set of smaller ones/LEDs etc might tidy it up?). You may have to fabricate brackets to allow for the headlamps to fit.

Don't forget the top fairing will be hiding quite a bit so you may have to relocate a lot of it.

Good Luck

[sparkmaster123]

yea see thats my problem, i dont have a welder, but if i could get someone to make something for me i may be able to figure it out, any suggestions anyone?

[XN85D]

What you need is the stock headlight and mounting brackets from either a GS700E or GS750E those are the standard variants of your bike with the 7 inch round headlight. I'd be interested in your old upper fairing bracket and headlight for rebuilding my GS700ES.
You can contact me through my website at uv99 | laser light shows.
Thanks,
Skipp

[XN85D]

Here are the stock fork ears on ebay for $25.00.
http://cgi.ebay.com/ebaymotors/1985-SUZUKI-GS700-GS-700-EF-FORK-EARS-750-850-1100_W0QQitemZ230287686525QQcmdZViewItemQQptZMotor cycles_Parts_Accessories?hash=item359e373b7d&_trks id=p3911.c0.m14&_trkparms=72%3A1171|66%3A4|65%3A12 |39%3A1|240%3A1318

[XN85D]

Here is a picture of your bike in standard form.
http://www.suzukicycles.org/photos/G...GS700E_450.jpg
Skipp