[ccwilli3]

Post up anything you wanna bring to Jennings and we can have a little swap meet.

I think I have a footpegless exhaust hangar for the 929 and I think it'll fit the 954 also. Let me make sure I can find the bolts to it, but I know I have the hangar itself. $20

I can also bring a set of useddunlop 207s. They have maybe 1200 miles on them if that. 120/190. Slight flat spot starting to show on the rear, but still round and good tread. Wore all the way to the edge on the rear, impress your friends at the wednesday night bike hangout! Would be good as a spare set in the case of a flat or something. $50

Got a pair of rennsport slicks, I think they are supersoft front, soft rear. They have a few heat cycles but are good and were used with warmers. They have a lot of tread depth remaining according to the divit holes. 120/180 $50

If anyone has a need for a size 50 1 piece roadcrafter, I can bring it also...

Thats all I can think of.

Anybody got anything they wanna sell or part ways with, bring it... Someone might have the unfortunate need for a lever or a footpeg or something, so if you have stuff like that, you might just make someone's day by bringing it!

[bubba]

i'll dig through my parts and bring what I have. As of now i have a shiny full exhaust (minus cables)

[nhfirefighter13]

Charlie, get in touch with Stu929 about that exhaust hanger. He needs one in a bad way.... I think.

I'll be taking some knee sliders down with me. $39.95 a pair.

I might even be persuaded to remove my HID system and sell it for $300 if anyone is interested (I need the money for other things) but basically that includes wiring, 2 unsheilded bulbs, 2 ballasts, and 2 ignitors.

[HondaGalToo]

We have a few banjo bleeder bolts for the Master Cylinder (Galfer brand bolts), stock foot pegs, stock windscreen for a 929, carbotex (heavy duty plastic) 929 headlight protector,
Fren Tubo kevlar brake lines (for 929, replicate stock set-up).

Any interest?

[ccwilli3]

Interested in banjo bleeder bolt, especially if it fits the dual line setup!

[HondaGal]

Charlie, the Galfer banjo bolt bleeders are for a dual line set up. We have 3 pair @ $20 ea.

I also have a set of Intuitive frame sliders (black). Previously installed but never used - $30

[ccwilli3]

HondaGal : Charlie, the Galfer banjo bolt bleeders are for a dual line set up. *We have 3 pair @ $20 ea. *

These are the ones that are near the master cylinder, correct? If so, mark one as sold...

[HondaGalToo]

Yup, they are indeed the dual banjo bolt bleeders that go on the fitting by the master cylinder. Your name is on one!

[jetblast10]

I want to look at the slicks

[ccwilli3]

jetblast10 : I want to look at the slicks

I'll bring 'em!

[jetblast10]

cool - thanks!!!

[smkeatr]

Got a set of stock clip-ons, not really for sale but if someone happens to need one, just in case, I'll have them with me. Also a stock windscreen, mine broke last time I crashed at the track. Also a rashed left side passenger peg and shifter lever that is a little scratched up but intact. So, if anybody happens to 'need' any little parts just in case, I'll have them there. It would suck to have to park your bike after a slight get off because your shifter is broke. These are all for a 929.

[nhfirefighter13]

I'll probably have a set of 208's that fit an R6 (Can't think of the sizes right now) with me if I can fit em in the truck for anyone with another bike or a friend who needs those sizes.

[HondaGal]

I'll have an extra set of footpegs with me too, just in case they're needed.

[bubba]

anybody WANT FOR FREE the Exhaust system for the 929? If so let me know by 10pm edt. else i am just throwing it away

[flasher2001]

i would like a free 929 exhaust. thanx, bubba!!

[bubba]

its yours