Swing Arm Removal

Johnnynhl · 09-05-2008, 2:59 PM

HI does anyone have a allen key/special tool for removing the swing arm?, that they would be prepared to loan/sell.
thanks
Johnny

bladeracer · 09-06-2008, 2:30 AM

Go to the hardware store and buy a bolt with a 24mm AF hex and a nut to suit. Thread the nut onto the bolt and weld it into place. If you don't have a welder you can peen the end of the bolt over with a hammer so the nut can't come off.
You can now undo them with a 24mm socket or spanner.

Johnnynhl · 09-14-2008, 3:09 PM

Thanks Mate, worked a treat.

CBR929RE · 09-14-2008, 3:27 PM

Quote:

Originally Posted by bladeracer

Go to the hardware store and buy a bolt with a 24mm AF hex and a nut to suit. Thread the nut onto the bolt and weld it into place. If you don't have a welder you can peen the end of the bolt over with a hammer so the nut can't come off.
You can now undo them with a 24mm socket or spanner.

easier way is to just put 2 nuts on there and tighten them together.