looking for 954 upper triple

brijesh600 · 01-30-2009, 12:13 PM

Trying to change the front end on VFR800, i need 954 upper triple and also if you have the rest of the front end such as forks, fender , calipers and wheel, what you want shipped to 67215.
thanks

bladeracer · 01-30-2009, 1:40 PM

I would've thought the 954 forks would be a lot shorter than the VFR's?

brijesh600 · 01-30-2009, 4:54 PM

Quote:

Originally Posted by bladeracer

I would've thought the 954 forks would be a lot shorter than the VFR's?

yes they are (by an inch and an half) but it doesnt bother my situation since i plan on mounting dirtbars on them (streetfightering the bike!)So the forks dont have to be pushed up the top triple to mount the handlebars like the stock VFR, they just to be flush with the top triple, that should make up some of the height difference!

bladeracer · 01-30-2009, 9:29 PM

Well, as long as the distance between the axle and the lower clamp isn't reduced too much they should work okay.
I put GSXR600 forks on my ZX6R. They're 55mm shorter though so I had to make a stepped top clamp as the tyre was hitting the radiator under brakes.

kylenv · 02-05-2009, 3:57 AM

if you have any interest I have 2004 zx-10forks wich are great and gold so they look cool. also the front fender and front brakes you'd just need a wheel and figure out the triple. I put a set on my 636 and someone else used a set on a f4i so its not that hard. I'll sell for cheap as there extras.

chasesdaddy01 · 02-07-2009, 4:46 PM

I have everything you need...pm I'll give you a good deal