Bogging when giving slight throttle..
I have a 92 SC28 blade.. I made the viking mod, and it has a race exhaust, and dyno jet needles. And i has #140 main jets and #38 Pilot jets in..
I have a wideband lambda, and it runs great everywhere but right off throttle, in idle AFR is 12.9 (with the idle screws 2 turns out), but the secound i just lifts the throttle a little bit, it goes way to rich.. Wich makes it bog when im riding very slow and gives a little throttle, og when starting from a traffic signal :/ Is it the Throttle valve cutaway i need to adjust next, or would you guys go down in the pilot jet? (original size is #40) Its driveing me crazy in the city..
All experiences are welcome