Re: need help with speed senor
I would say as long as there are sufficient leads off of the sensor itself, trim all the wires equal, solder in new wires (just go to the autostore and gauge match the wire), shrink wrap the repairs with wire heat-shrink. As long as there is enough lead from each wire on the connector, do the same thing to it. Just trim out the wires in-between so that the entire assembly is all the same length. In order to make it look better, sleeve the entire outfit once you are done. If you do not have enough wire on each side you can probably still repair it, but it will not be reliable.
/**Serenity**\ 2002 Honda CBR954RR Fireblade
"But risks must be taken, because the greatest risk in life is to risk nothing. Only the person who risks is truly free."