Wont start loud buzzing sound near battery
So I installed an HID kit and everything seemed fine, but when I went to start my bike as soon as I turn on the ignition switch (kill switch) my display cuts off and the neutral light flickers while this loud buzzing sound comes from what it seems to be the wires in front of the battery right near the gas tank. When I press the ignition nothing happens, no clicking or anything. After a few seconds the buzzing noise starts to make a crackling/frying noise for a second or two and keeps buzzing very loud. With the ignition switch off the sound goes away and the speedo display works as normal. But as soon as that kill switch is turned on the system goes to ****. I dont see why my hid kit would have messed something up, but it was fine before that. I charged my battery last night and even tried to jump it which both made no difference.
Does it sound like it could be a relay or fuse? I did turn my bike on and off without starting it numerous times during the hid kit install. Also I dont hear the fuel pump prime when flipping the kill switch
Last edited by socci; 05-11-2014 at 11:43 AM.