FINALLY!! I Made those Titanium rods For CBR929/954rr - Honda Motorcycles - FireBlades.org
Honda FireBlade Discussion of the Honda CBR 900RR, Honda CBR 929RR, Honda CBR 954RR, and Honda CBR 1000RR Motorcycles.

User Tag List

Reply
 
LinkBack Thread Tools
post #1 of 28 Old 12-19-2014, 9:38 AM Thread Starter
 
Join Date: 08-28-2009
Location: LA
Posts: 199
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 18
             
FINALLY!! I Made those Titanium rods For CBR929/954rr

After searching some info, I made it...

The weight of saving is about 50% off OEM, And of course STRONGER...






Conpare, before and After....


Weight..of Ti-rod Before machined




One more type Ti-rod, saving bouch of weight, And surface coating.
but not using it..


I choose this in my next race egine...hope it better than...


Thanks Mika patiently help my engine performance

My custom Big engine valves EX25mm/31mm INtake.


Engine head ported, flow tested, and CBR1000rr/954rr mod Cam..

Last edited by Hung; 12-19-2014 at 9:47 AM.
Hung is offline  
Sponsored Links
Advertisement
 
post #2 of 28 Old 12-19-2014, 11:46 AM
 
Join Date: 05-27-2014
Location: Magnet Indiana
Age: 40
Posts: 3,529
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 49 Post(s)
Reputation Power: 48
                     
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

ok, thats bad ass

"love is the feeling you get when you like something as much as your motorcycle."-Hunter S. Thompson
954Kevin is offline  
post #3 of 28 Old 12-19-2014, 1:31 PM
 
Join Date: 04-08-2008
Location: Seattle
Posts: 1,504
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Reputation Power: 27
                   
Mikeo is offline  
Sponsored Links
Advertisement
 
post #4 of 28 Old 12-19-2014, 4:01 PM
 
Join Date: 01-08-2011
Location: Northern CA
Posts: 7,455
Mentioned: 6 Post(s)
Tagged: 2 Thread(s)
Quoted: 120 Post(s)
Reputation Power: 199
                     
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

Silly question: I know you must have some engineering skills - are you comfortable that you haven't compromised the rods strength? Especially considering their application and high revs.
That looks like quite a bit of material you whittled off there.
They remind me of aftermarket H-rods.
jondog9 is offline  
post #5 of 28 Old 12-21-2014, 8:27 AM Thread Starter
 
Join Date: 08-28-2009
Location: LA
Posts: 199
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 18
             
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

Quote:
Originally Posted by jondog9 View Post
Silly question: I know you must have some engineering skills - are you comfortable that you haven't compromised the rods strength? Especially considering their application and high revs.
That looks like quite a bit of material you whittled off there.
They remind me of aftermarket H-rods.
The rods strength is depend on it design..H pin rod is not strong than I pin..But after designed and culculatedm, H-pin is lighter than I pin design, Why not use I pin, because I have 64VL titanium material..good on stretch ...

This is what our company have ...3D

I use this 3D machine to be my perfect engineer....

I can measure each size which I wanna know/work..

And we working on OEM parts...BUT can not sell.




The CBR929 motor power is not enough for me in race track, of course I wanna more..

Last edited by Hung; 12-21-2014 at 8:39 AM.
Hung is offline  
post #6 of 28 Old 12-21-2014, 7:28 PM
 
Join Date: 04-08-2008
Location: Seattle
Posts: 1,504
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Reputation Power: 27
                   
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

Those really do look awesome, and the sad part is about 3 weeks after I bought mine, Ferracci sold a set of Ti rods for a 893 motor for $600. I still kick my own ass for not buying them. Either way, here is one of my spare Carrillos for comparison.





Mikeo is offline  
post #7 of 28 Old 12-22-2014, 2:23 AM Thread Starter
 
Join Date: 08-28-2009
Location: LA
Posts: 199
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 18
             
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

Mikeo

600 for Ti-rods is crazy good deal.....

And yours on the pics are also Ti-rods too?
Hung is offline  
post #8 of 28 Old 12-22-2014, 2:42 AM
 
Join Date: 05-16-2012
Location: Finland
Posts: 717
Mentioned: 2 Post(s)
Tagged: 1 Thread(s)
Quoted: 33 Post(s)
Reputation Power: 16
             
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

Have you tested that big valve head yet? I'm just thinking does the pistons and 75 mm bore have enough room for so big valves? Bigger valves and another set of cams or getting these ones i have hardwelded is on my to do list allso. But i got stuck on the valve to piston tolerances etc. and haven't had the time to take the head of for measurements.
mika_u is offline  
post #9 of 28 Old 12-22-2014, 3:05 AM
 
Join Date: 05-16-2012
Location: Finland
Posts: 717
Mentioned: 2 Post(s)
Tagged: 1 Thread(s)
Quoted: 33 Post(s)
Reputation Power: 16
             
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

And how much did those rods weight with complete with bolts?
mika_u is offline  
post #10 of 28 Old 12-22-2014, 12:38 PM
 
Join Date: 04-08-2008
Location: Seattle
Posts: 1,504
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Reputation Power: 27
                   
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

Quote:
Originally Posted by Hung View Post
Mikeo

600 for Ti-rods is crazy good deal.....

And yours on the pics are also Ti-rods too?

Yeah, I know it was a good deal, don't remind me...


no, mine are not Ti, but I wish they were.
Mikeo is offline  
post #11 of 28 Old 12-22-2014, 1:28 PM Thread Starter
 
Join Date: 08-28-2009
Location: LA
Posts: 199
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 18
             
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

Quote:
Originally Posted by mika_u View Post
Have you tested that big valve head yet? I'm just thinking does the pistons and 75 mm bore have enough room for so big valves? Bigger valves and another set of cams or getting these ones i have hardwelded is on my to do list allso. But i got stuck on the valve to piston tolerances etc. and haven't had the time to take the head of for measurements.
Mika

Thanks for much engine knowledge help..

I have not yet test the big valves..Will email some pics to you.
Hung is offline  
post #12 of 28 Old 12-22-2014, 11:02 PM
 
Join Date: 01-06-2014
Location: Colorado
Posts: 328
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 17
               
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

That's awesome. Great work! So can you make 929 rods sell them or no?

2001 Erion 929 Race Bike
1998 Ducati 748
2002 CR125/CR500 Aluminum Conversion
1994 CR500 Completely Built
2000CR250/CR500 Conversion In Process
1950 Indian Warrior 500cc Vertical Twin
1995 Mustang Cobra Turbo Built 820rwhp/879ftlbs
zfrilly3 is offline  
post #13 of 28 Old 12-23-2014, 3:34 AM Thread Starter
 
Join Date: 08-28-2009
Location: LA
Posts: 199
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 18
             
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

Quote:
Originally Posted by zfrilly3 View Post
That's awesome. Great work! So can you make 929 rods sell them or no?
Not ready yet..I'm testing Titanium rod for Race scooter now...

Hosepower is not quiet different. but rev is fast then you can feel that

Hung is offline  
post #14 of 28 Old 12-23-2014, 8:25 AM Thread Starter
 
Join Date: 08-28-2009
Location: LA
Posts: 199
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 18
             
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

Quote:
Originally Posted by mika_u View Post
And how much did those rods weight with complete with bolts?

Mika

See here...0.266 Kg... not really light.


Hung is offline  
post #15 of 28 Old 12-23-2014, 12:44 PM
 
Join Date: 10-20-2014
Location: was on the left coast, now in central Va(dont ask)
Posts: 226
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 10 Post(s)
Reputation Power: 6
 
Re: FINALLY!! I Made those Titanium rods For CBR929/954rr

nice work. I have a Micro Vu similar to your machine we use for qc. Did you model in solidworks?
feelfree is offline  
Reply

  Lower Navigation
Go Back   Honda Motorcycles - FireBlades.org > Honda Motorcycle Models > Honda FireBlade

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda Motorcycles - FireBlades.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
A valid e-mail address is REQUIRED. You will not have access to any site features until you activate your account using the activation e-mail that is sent to this address.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
Finally made a custom GP exhaust what do you guys think? faststang71 Honda FireBlade 7 11-11-2014 9:14 PM
Friends.... this is my CBR 954RR 2002 made in BRAZILLLLL corso Honda FireBlade 14 01-07-2012 4:07 PM
Wanted - Titanium color '03 954RR Chuck_V13 Wanted 10 10-04-2011 9:10 PM
03 954rr for sale black&titanium cbr954rrider Motorcycles For Sale 10 03-17-2010 7:15 AM
Somebody finally made me laugh Chain Off-Topic 1 09-13-2003 9:22 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome