PCIII USB Problems - Honda Motorcycles - FireBlades.org
Honda FireBlade Discussion of the Honda CBR 900RR, Honda CBR 929RR, Honda CBR 954RR, and Honda CBR 1000RR Motorcycles.

User Tag List

 
LinkBack Thread Tools
post #1 of 3 Old 05-17-2005, 10:40 AM Thread Starter
 
Join Date: 11-11-2004
Posts: 7
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 0
 
PCIII USB Problems

I put a PCIII USB on my 2001 CBR929 about 6 months ago and everything seemed to be good, loaded a few different maps but stayed with one this site recommended for the 2001 CBR929RR (M104-023), ok now that I've had the bike for a while now I'm pushing it just a little father then before, feeling more comforable on the bike. I start to notice the bike cutting out around 8000rpms this happens in any gear the bike has only 5000 miles on it and the only thing I put on it was the PCIII so I unhook the PCII the bike runs better no missing at 8000rpms and runs smother around 2.5-3000rpms so I hook it back up load some different maps stock, zero all the maps does the same cuts back around 8rpms, is the PCIII USB bad?

Last edited by cqjqc; 05-17-2005 at 11:32 AM.
cqjqc is offline  
Sponsored Links
Advertisement
 
post #2 of 3 Old 05-17-2005, 11:00 AM
 
Join Date: 11-21-2002
Posts: 705
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 0
 
Re: PCIII USB Problems

I'd call Dynojet and see what they say, but it sounds like your PC3 is bad to me.
slowpoke is offline  
post #3 of 3 Old 05-17-2005, 1:31 PM
Administrator
 
Red Rider's Avatar
 
Join Date: 07-23-2001
Location: Motor City, Michigan
Age: 60
Posts: 8,596
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Reputation Power: 47
                     
Re: PCIII USB Problems

I found this from the Dynojet FAQ:

Q: I have had a Power Commander on my bike for quite a while and it has been running great. One day it just started running rough (like it was a cylinder was misfiring) so I disconnected the Power Commander and it went away. What could be the problem with the unit?

A: The most common problem we see with returned Power Commander is damage to the wiring harness. If the Power Commandersí wiring harness is cut or nicked by the frame or sharp bracket it can short to ground. Once this happens a number of symptoms may be present, overly rich running, hesitation, stalling, etc. We suggest very closely inspecting the harness for any signs of damage. Small cuts may be difficult to see. If any damage is found, you can simply retape that area, unless the wiring is significantly shorted.


You may also want to upgrade the software to the latest version, too.

"It is better to post and risk reposting than to have never posted at all."





Last edited by Red Rider; 05-17-2005 at 1:32 PM.
Red Rider is offline  
Reply

  Lower Navigation
Go Back   Honda Motorcycles - FireBlades.org > Honda Motorcycle Models > Honda FireBlade

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda Motorcycles - FireBlades.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
A valid e-mail address is REQUIRED. You will not have access to any site features until you activate your account using the activation e-mail that is sent to this address.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
PC III vs. PCIII USB 1st954luke Honda FireBlade 0 05-14-2004 3:55 PM
PCIII vs. PCIII USB maps MrX954 General Discussion 2 04-19-2004 7:05 PM
PCIII USB question Zang General Discussion 3 04-18-2004 10:38 PM
PCIII usb BushrodW General Discussion 4 04-13-2004 8:48 AM
PCIII USB installed w/Full Ti Hindle MrX954 General Discussion 2 03-16-2004 8:31 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome