900rr clip ons on a 929? - Honda Motorcycles - FireBlades.org
Honda FireBlade Discussion of the Honda CBR 900RR, Honda CBR 929RR, Honda CBR 954RR, and Honda CBR 1000RR Motorcycles.

User Tag List

 
LinkBack Thread Tools
post #1 of 8 Old 03-25-2006, 11:39 AM Thread Starter
 
Join Date: 01-09-2006
Location: Grandville MI
Posts: 621
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 14
 
900rr clip ons on a 929?

Will 900rr clip ons fit on a 929? My bike went down yesterday and broke the right clip on. My friend has a set that came off his 900 and I was wondering if they will fit with the 929 having inverted forks? or if the diameter was thesame? If not I need a 929 clip of or a pair of a 954 for cheap as possible. I need as much money as I can towards fixing the tail section. If anybody every considered a Freestyle ingenuity cage. It was a good investment. MY bike went down around 75-80 and it went down on left side and flipped on the right and off the entire bike the Entire front went untouched with the exceptipn of a a few LIGHT scratches on the winscreen I think will buff out, by where the mirror use to be. I need a stock rear seat,or seat cover. But i need a clip on really bad mine broke and Cant drive it until then. ANybody have a white tailsection let me know. I have a spair but it has to be painted so i may buy another one of a deal comes a long. anybody have a cheap pipe without rash to replace the rashed can i have? THanks and The cage was the best money i ever spent for my 929 would probably be totalled the way it flipped it would have been over. Luckily for me I had that on the bike and a leather on my hide because I walked away with a quarter size scrape on my knee and a nickel size scratch on my elbow and a scrape 1inch tall by 3inch wide on lower back. Any body have any of the mention above parts let me know.

Thanks
187mustang is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 03-25-2006, 11:38 PM
 
CBRBob's Avatar
 
Join Date: 07-29-2003
Location: Central NJ
Age: 52
Posts: 1,524
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 18
 
Re: 900rr clip ons on a 929?

If the fork tubes on the 900 are 50mm, then yes.

CBR Bob
TeamPromotion Coach#29TPM
Rider Ed. of N.J. Inc. Senior RiderCoachRENJ
CBRBob is offline  
post #3 of 8 Old 03-26-2006, 12:15 AM
 
Join Date: 01-31-2006
Posts: 2,930
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 0
     
Re: 900rr clip ons on a 929?

Glad to hear you're OK. At the speed you were going that could have been a really nasty spill.

I'm also glad that you have minimal damage to the bike. How's the engine? Did you stand the bike upright and allow all the oil to drain back into the pan before trying to start it again?

There are several procedures and precautions you need to take before getting on the road again. For one make sure that everything is still tight and that no wiring got knocked loose or rashed. I would be sure to change all the fluids as well. You never know what can happen as a bike tumbles through the air and across the ground.
Custom900 is offline  
Sponsored Links
Advertisement
 
post #4 of 8 Old 03-26-2006, 12:44 AM Thread Starter
 
Join Date: 01-09-2006
Location: Grandville MI
Posts: 621
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 14
 
Re: 900rr clip ons on a 929?

Everything seems to be fine It started up and no noises of any sort. It twisted the mid pipe but i had on spare off a 954. The can go rashed bit I had a crash cage that saved a lot. I need to replace some peices on the cage. The cage got twisted a little but I will do thurough inspection before I get it back on the road. I still need a Back seat and possibly a clip on I have to measure the clip ons from the 900 to see if they will fit. I know I am lucky. I'll be even luckier if everything esle on the bike is fine apon thurough inspection. Are the stock fork tube/ clip on size i need 50mm?

Thanks
187mustang is offline  
post #5 of 8 Old 05-21-2006, 8:03 PM
 
Join Date: 05-21-2006
Location: Alberta, Canada
Posts: 44
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 0
 
Re: 900rr clip ons on a 929?

Were you able to find the answer to this question?
MarkCNP is offline  
post #6 of 8 Old 05-23-2006, 9:34 AM Thread Starter
 
Join Date: 01-09-2006
Location: Grandville MI
Posts: 621
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 14
 
Re: 900rr clip ons on a 929?

I bought a used clip on off a 929. I still have the 900 clip ons but the measured 48mm so I went on the safe side and bought the correct one before I took it apart. The bike is all back together now and it looks better than before. Now it is one of a kind It runs and drives as good as it did before.
187mustang is offline  
post #7 of 8 Old 05-23-2006, 7:41 PM
 
Join Date: 05-21-2006
Location: Alberta, Canada
Posts: 44
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 0
 
Re: 900rr clip ons on a 929?

Quote:
Originally Posted by 187mustang
I bought a used clip on off a 929. I still have the 900 clip ons but the measured 48mm so I went on the safe side and bought the correct one before I took it apart. The bike is all back together now and it looks better than before. Now it is one of a kind It runs and drives as good as it did before.
What year bike did the 900 clip ons come from? I've heard that the '98-'99 clip ons are a bit higher (more comfortable) and will fit the older bikes. If anyone can confirm that, it would be much appreciated.
MarkCNP is offline  
post #8 of 8 Old 05-23-2006, 8:24 PM Thread Starter
 
Join Date: 01-09-2006
Location: Grandville MI
Posts: 621
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 14
 
Re: 900rr clip ons on a 929?

They came off a 99 900rr IF you can use them I got a set I can sell ya
187mustang is offline  
Reply

  Lower Navigation
Go Back   Honda Motorcycles - FireBlades.org > Honda Motorcycle Models > Honda FireBlade

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Honda Motorcycles - FireBlades.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
A valid e-mail address is REQUIRED. You will not have access to any site features until you activate your account using the activation e-mail that is sent to this address.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
954 clip ons on a 929? rydman Honda FireBlade 5 07-22-2005 1:34 AM
FS: 929 Clip Ons Chrome Dome For Sale 0 05-06-2005 1:42 PM
Clip ons for a 929 CBR Riding Fool General Discussion 3 03-22-2005 7:55 PM
Clip-ons for 929? BigDawg Honda FireBlade 8 03-17-2004 4:38 PM
929 clip-ons Ice Honda FireBlade 7 01-24-2004 12:27 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome