Re: Wont start!!!
Hi, I have a 2004 CBR10000RR that was running quite normally until I removed the headlight, speedo and fairing assembly to do a repair to the steering head frame (disguised crash damage from a previous owner).
The 'nose cone' assy had to be off the bike for quite a while and at some point during this time I thought I would see if I could run the bike to keep the battery topped up etc, not really expecting it to start as the plugs to the speedo etc were not connected therefore the circuit was not complete.
As expected it didn't start, but I'm worried that I may have upset the engine management system, as when I reassembled the nose cone and turned the ignition on, straight away the 'overheat' light and cooling fan came on. She was reluctant to start but finally did for a while on what seemed like only 3 cyls before finally stalling. Although everything appears good and she turns over ok, I haven't been able to get her to start, but the overheat light and fan no longer come on with the ignition.
Does anyone have any suggestions please?