I have the Honda Fireblade 900 RR-T, and when it gets hot the gear selector does not return to the normal position.
In 1st gear, pull away, up to 2nd - all okay, then when I try to pop it into 3rd nothing.
I give the selector a slight tap (as if I rest my foot on the top of the selector) and then try again, it works.
The same thing happens when gearing down.
Today I replaced the gear selection spring, and a new clutch (which was needed anyway) and still no difference. Also did the oil and oil filter.
It only happens when the bike gets hot, when its cold everything is fine.
Any advice is much appreciated!