Join Date: 01-08-2009
Location: Haughton, Louisiana currently in Iraq.
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Reputation Power: 21
Re: looking for some help cbr 900 rr
yes, i can help......when you re-insert the idle screw and it stops, thats because your bottoming out on the inside of the carb....be carefull because if you tried to force it, you might have put a dent in the side of the slide which will make it hard to adjust the idle if the dent is close to where it needs to be set....
what happend is it sounds like the slide fell down to where you can't get it back in all the way, so you have to crack the throttle open to about 1/4 and screw it in.....once you do that, crank and run till it hits operating temp, then set the idle, always crack the throttle during adjustment of the idle screw on that model....
DO YOUR DUTY IN ALL THINGS, YOU CANNOT DO MORE, YOU SHOULD NEVER WISH TO DO LESS!
GENERAL ROBERT E. LEE