Honda Motorcycles - FireBlades.org - Reply to Topic
Honda FireBlade Discussion of the Honda CBR 900RR, Honda CBR 929RR, Honda CBR 954RR, and Honda CBR 1000RR Motorcycles.

Thread: Steering stem or bearing replacement Reply to Thread
Title:
Message:

Register Now



In order to be able to post messages on the Honda Motorcycles - FireBlades.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
A valid e-mail address is REQUIRED. You will not have access to any site features until you activate your account using the activation e-mail that is sent to this address.

Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
12-29-2004 11:55 PM
rocket
Re: Steering stem or bearing replacement

I opted out of the recall and bought a nice damper myself YMMV.
12-29-2004 9:46 PM
CBRBob
Re: Steering stem or bearing replacement

Tapered bearings are roller bearings. It's ball bearings that were put in during the recall.
12-29-2004 2:33 PM
synergy
Re: Steering stem or bearing replacement

Sorry, bro, but I think that Service Bulletin expired in June or July of 2004. Call a Honda dealer, they should be able to look it up for you.
12-29-2004 12:57 PM
luvtolean
Re: Steering stem or bearing replacement

The tapered bearing has more bearing area and thus gives less friction and more feel.

The roller bearing adds friction, which acts like a steering damper, and reduces feel, so you don't feel quite so much going on.



12-29-2004 12:54 PM
ULEWZ
Re: Steering stem or bearing replacement

Quote:
Originally Posted by CBRBob
Yea the tapered bearings will last forever but do steer a little slower than the ball bearings. It's a tradeoff.
I thought the complaint was that the CBR954s had head shake problems due to steering that was too quick. I was also under the impression that the tapered bearings were quicker than the roller bearing, since the steering on my VFR got quicker with the tapered bearings. Oh well, live and learn.
12-29-2004 12:18 PM
luvtolean
Re: Steering stem or bearing replacement

They're probably not worn out, just loose.



12-29-2004 12:18 PM
CBRBob
Re: Steering stem or bearing replacement

Yea the tapered bearings will last forever but do steer a little slower than the ball bearings. It's a tradeoff.
12-29-2004 3:14 AM
02FBlade
Re: Steering stem or bearing replacement

Check for the recall...your head tube will been stamped if 'recalled', optional recall... on it or just look up your SN. I reccomend the recall. It was mostly for the first few batches of 954s...and honda started doing the change at the factory.

the stock tires/suspension...setup is pretty slow to turn in stock. Research people...RESEARCH! junking the 190/50 is the first step. then start w/ suspension. Unless you stunt..then get the phuc outta here.
12-29-2004 1:39 AM
SouLJahz
Re: Steering stem or bearing replacement

they should be covered under warranty provided you havent been using the bike to stunt around.
and the recall was only for 02 models as well i believe.
12-28-2004 11:37 PM
Bacchus
Re: Steering stem or bearing replacement

You're talking about the 954, right? That one had a recall. They went from (IMO, superior) tapered bearings, and replaced with ball bearings with the recall. I had the recall performed, and really don't notice much of a diff. However, if you're a track kinda guy, you may just want to pull the steering stem off and clean out the junk (shavings) yourself.
12-28-2004 11:29 PM
FHL
Steering stem or bearing replacement

This is covered on my bike right? I think both are bad. What happens is when I press the handlebars to turn the bike it takes a few inches to get the bike to actually start leaning so there's a noticible amount of "play" in the handlebars before the bike starts to turn and I was under the impression riding my f2 and my 954 back to back that the steering is supposed to be stiff.

My bike has 3k miles.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome