Honda Motorcycles - FireBlades.org - Reply to Topic
Honda FireBlade Discussion of the Honda CBR 900RR, Honda CBR 929RR, Honda CBR 954RR, and Honda CBR 1000RR Motorcycles.

Thread: Error Code 35 ? Reply to Thread
Title:
Message:

Register Now



In order to be able to post messages on the Honda Motorcycles - FireBlades.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
A valid e-mail address is REQUIRED. You will not have access to any site features until you activate your account using the activation e-mail that is sent to this address.

Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
08-22-2003 1:35 AM
Kookie
Re: Error Code 35 ?

08-21-2003 11:46 PM
AfterShock
Re: Error Code 35 ?

Quote:
googolplexu : Quote (AfterShock @ Aug. 21 2003, 1:44pm)doesn't the servo also operate the flapper in the airbox? Do I need to remove that also or leave it as is?
Yes, Gut it or it will remain in the springloaded 'closed' position. *I have been thinking a lot about removing my solenoid. *If I get a wild hair up my butt (not literally ) then I will post a Thread with my findiings. *I will also look in my box of parts when I get home and see if I have a leftover solenoid lying around.

solenoid = servo?
08-21-2003 3:28 PM
Kookie
Re: Error Code 35 ?

Quote:
AfterShock : doesn't the servo also operate the flapper in the airbox? Do I need to remove that also or leave it as is?
Yes, Gut it or it will remain in the springloaded 'closed' position. I have been thinking a lot about removing my solenoid. If I get a wild hair up my butt (not literally ) then I will post a Thread with my findiings. I will also look in my box of parts when I get home and see if I have a leftover solenoid lying around.
08-21-2003 2:44 PM
AfterShock
Re: Error Code 35 ?

doesn't the servo also operate the flapper in the airbox? Do I need to remove that also or leave it as is?
08-21-2003 2:38 PM
CBRVFR
Re: Error Code 35 ?

At the track it was distracting me so I put on some electrical tape. Much better..........
08-21-2003 2:27 PM
AfterShock
Re: Error Code 35 ?

even if I got a full system, won't I still have that pesky error code flashing all the time because there is no servo motor connected? I left it off for now, and I get error 34 - basically the ecu doesn't see a servo.

Is there any way to disable the error from displaying?
08-21-2003 10:19 AM
Fossil
Re: Error Code 35 ?

Yep, my Road America off road jaunt toasted things as well. A quick call to our friend NH Firefighter and a shiny new Hindle system arrived in no time at all...
08-21-2003 1:23 AM
Keith1K
Re: Error Code 35 ?

Good reason to go with a full system
08-21-2003 1:13 AM
AfterShock
Re: Error Code 35 ?

Well the servo motor seems to be dead. Took it off and applied 12V to the pins and nothing. They aren't cheap either, like $150 at ronayers...

Anyone selling one?
08-20-2003 11:28 AM
Kookie
Re: Error Code 35 ?

Quote:
AfterShock : stupid me, didn't even mention it was a 929....
Regardless, the procedure is the same - follow the great info that CBR gave you.
08-20-2003 11:25 AM
AfterShock
Re: Error Code 35 ?

stupid me, didn't even mention it was a 929....
08-19-2003 9:22 PM
grafixman
Re: Error Code 35 ?

Quote:
CBRVFR :
FIRST, though, take off the tin cover from the HTEV valve and see if there is a rock in there, impeding the movement of the exhaust valve. This happened to me twice. (Once after a tour of the kitty litter at Road America, but that's another story...), and once just coming up my driveway.
*

Learn the hard way and check it last. *

After wasting a few hours checking everything else, finding a rotten pearl in your oyster will bring you much happiness.* *

08-19-2003 7:07 PM
CBRVFR
Re: Error Code 35 ?

Aftershock, I'm sorry I forgot to answer your pm last night.

Here's the info from the manual (954, right?)

FIRST, though, take off the tin cover from the HTEV valve and see if there is a rock in there, impeding the movement of the exhaust valve. This happened to me twice. (Once after a tour of the kitty litter at Road America, but that's another story...), and once just coming up my driveway.


Step 1. Disconnect 6 pin connector on the servo motor. Check for loose or poor contact on the connections.

2. Reconnect servo motor 6 pin connector, place the bike on the sidestand.
Turn the ignition switch to on and see of the MIL blinks.

If not, you fixed it.
If MIL=35,

Turn the ignition switch to off and the engine stop switch to off. Disconnect the 6-pin connector again.
Disconnect the control cables to the servo motor.

Turn the ignition switch & engine switch to on and see of the MIL blinks.

If not, you found the source of the problem. Check all cables and operation of flapper and exhaust valve.
If MIL=35,

remove the servo motor, connect 12 V to red (+) and blue(-)
If it doesn't energize, that's your problem

If it Does, then the problem is either in your ECM harness, or the ECM.

Hope that helps
08-19-2003 5:46 PM
AfterShock
Re: Error Code 35 ?

What's this mean, because the bike seems to run fine... ? I'll have to just replace that motor?



08-19-2003 5:20 PM
WildBillF1
Re: Error Code 35 ?

Faulty EGCV and air intake valve servo motor.
This thread has more than 15 replies. Click here to review the whole thread.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome