Honda Motorcycles - FireBlades.org - Reply to Topic
Honda FireBlade Discussion of the Honda CBR 900RR, Honda CBR 929RR, Honda CBR 954RR, and Honda CBR 1000RR Motorcycles.

Thread: 03 954 pump not going on Reply to Thread
Title:
Message:

Register Now



In order to be able to post messages on the Honda Motorcycles - FireBlades.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
A valid e-mail address is REQUIRED. You will not have access to any site features until you activate your account using the activation e-mail that is sent to this address.

Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
10-02-2008 9:21 AM
954kid911
Re: 03 954 pump not going on

ok it was the ecm thank god bladeracer thank you so much for the help i owe you alot
09-28-2008 11:27 AM
954kid911
Re: 03 954 pump not going on

i fixeed the problem with the pump it was the bank angle sensor now i dont have any spark
09-27-2008 2:39 PM
kagmyster00
Re: 03 954 pump not going on

had the same problem man you should try the this i was in the same boat you are Ok here is what i am dealing with.

Bike will turn on but no pump.

Here is the problem. DIODE under the ignition switch.

When this goes bad or breaks you can replace it with a new one.

What it does!

I am not sure how it works but it supplies the ICM with around 9v of power. IT IS NOT A RESISTOR.

Ok here is the backyard way to test this. IT WORKS I JUST DID IT!
(For a quick fix)

Take a 9v battery and ground the neg side to the frame. Now take the connect the pink wireunder the ignition to the positive side.

Turn the bike on and the pump will kick on if the diode is bad

try this man a new diode is like 5 dollars
09-27-2008 3:52 AM
954kid911
Re: 03 954 pump not going on

put the bankangle sensor nothing waiting for the ecm hope to god thats the problem
09-26-2008 9:43 AM
954kid911
Re: 03 954 pump not going on

ok so i ordered a bankangle sensor and a new ecm off ebay hopefully it will work a new ecm is $850 so used will be just fine lmao
09-24-2008 1:22 AM
bladeracer
Re: 03 954 pump not going on

Hmmm...maybe jump it the same way it was jumped on the old harness then?
The only practical way to check the ECU is to replace it with a known good one and see if the problem goes away.
09-23-2008 7:44 PM
954kid911
Re: 03 954 pump not going on

i never had one when i got the bike it was off the guy really f***ed up the wiring on the bike i believe he stunted it so he didnt want the bank sensor i saw on forums to tie together the outer 2 wires to jump it how can i check to see if its the ecm i might have blown it when putting wires back together and i pluged the mapsensor plug to the tps and the tps to the map
09-23-2008 9:30 AM
bladeracer
Re: 03 954 pump not going on

I haven't opened up the bank angle sensor to see how it works but as far as I know it's a simple sliding switch which is normally open. It closes when the bike falls over.
I don't think jumping it is as simple as twisting the wires together.
Reconnect it and see if it works...
09-23-2008 9:26 AM
954kid911
Re: 03 954 pump not going on

i have no poer coming out of the computer to the injectors at all the injectors work ok all sensors are connected ok kickstand sensor ok i tryed everything
09-23-2008 9:20 AM
954kid911
Re: 03 954 pump not going on

im thinking the guy who had the bike before me used it as a streetfighter the front harness was mutilated soo i did all the wires the bankangle sensor was on it so i twisted the oter side wires together i jumper it rite ?
09-22-2008 11:48 PM
bladeracer
Re: 03 954 pump not going on

Why did you jump the bank angle sensor?
If you re-connect it do you get spark?
09-22-2008 11:29 PM
954kid911
Re: 03 954 pump not going on

ok now i got it all figured out i got the new harness for the tac and i jumped the angle sensor nowww i have no spark the bike ran perfect with no probs b4 i did the harneses i had to unplug the ecu now i have no spark from the ecu i checked everythin u think it maybe the ecu i have injectors pumping away but no spark im stumped any info ?
09-21-2008 5:39 AM
bladeracer
Re: 03 954 pump not going on

On the 954 I think it's on the back of the headlight.
09-21-2008 4:06 AM
954kid911
Re: 03 954 pump not going on

https://www.fireblades.org/forums/hon...tml#post720455
09-21-2008 4:05 AM
954kid911
Re: 03 954 pump not going on

hey thanks found one prob now have another ques where is the angle sensor what does it look like where is it?
This thread has more than 15 replies. Click here to review the whole thread.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome