Honda Motorcycles - FireBlades.org - Reply to Topic
Honda FireBlade Discussion of the Honda CBR 900RR, Honda CBR 929RR, Honda CBR 954RR, and Honda CBR 1000RR Motorcycles.

Thread: 2009 Fireblade race shift conversion Reply to Thread
Title:
Message:

Register Now



In order to be able to post messages on the Honda Motorcycles - FireBlades.org forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
A valid e-mail address is REQUIRED. You will not have access to any site features until you activate your account using the activation e-mail that is sent to this address.

Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
05-23-2010 8:24 AM
axlD
Re: 2009 Fireblade race shift conversion

yes, i would post up pics , but the bike is at the dealership waiting on a new muffler! i will post up when i get it back. i pulled the sprocket cover off and reversed the splined shift ARM. ( get ur shift foot LEVER where u want it)then i measured from the engine case to the center of the shift ROD / then from the frame( toward the rear set) to the center of the shift ROD. the put the same measurements on the cover,( i started small and enlarged as needed) what i did was put blue painters tape in the areas i needed to cut and traced out with a marker first. took several mock ups to get it clearanced properly. hope this helps for now.
05-23-2010 7:57 AM
mmamster
Re: 2009 Fireblade race shift conversion

Quote:
Originally Posted by axlD View Post
you talking about GP/ reverse ? i cut my factory front spocket cover in two locations. just enough for the shift rod to clear.
Thanks.

Could you post some pictures of what you have done? I want to try and do this mod myself but obviously don't want to muck it up. Is it a case of reversing the side on which the shift rod is placed?
05-22-2010 5:27 AM
red08
Re: 2009 Fireblade race shift conversion

Quote:
Originally Posted by axlD View Post
you talking about GP/ reverse ? i cut my factory front spocket cover in two locations. just enough for the shift rod to clear.

05-21-2010 1:11 PM
axlD
Re: 2009 Fireblade race shift conversion

you talking about GP/ reverse ? i cut my factory front spocket cover in two locations. just enough for the shift rod to clear.
05-19-2010 11:06 PM
Rhojef
Re: 2009 Fireblade race shift conversion

There is a couple of threads from 08.
You might have to look back a bit.
Been a few guys who have done it using the standard linkage and a small grinder.
05-19-2010 10:37 PM
mmamster
2009 Fireblade race shift conversion

All

I want to covert my fireblade to race shift pattern. Anyone know of a "how to" thread on this or other sites. I found one dealing with the old 954 but not my 09.


I have a race bike now with raceshift pattern which I prefer, but switching back to stock on the blade is really messing with my brain!

Cheers
Mark

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

 
For the best viewing experience please update your browser to Google Chrome