Honda Motorcycles - FireBlades.org banner

929 suspension settings

4K views 2 replies 2 participants last post by  bbr-streetgang 
#1 ·
lo guys,
just arrived in australia to spend a few years working here fixing lifts/elevators.
Bought a 929 blade to get around on but previous owner has tinkered and left me without a handbook. Can anyone please tell me the standard suspension settings??(front and rear) I like to start on standard and tweak from there. Current ride quality is dubious when pushing on, and i know it shouldnt be...
Cheers folks, I'm counting on you....

ed b
 
#2 ·
Fork - 18mm above fork bolt, rebound one turn from full hard, compression 1.5 turns from full hard.
Shock - 4th groove, rebound 2 turns from full hard, compression 1 turn from full hard.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top