Honda Motorcycles - FireBlades.org banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. New Member Introductions
    Hi there fellow Blade fans, Some scumbags stole my 1996 Fireblade in Oct and I was lucky enough to get her recovered. The usual idiot traits - burnout tires, fairings cracked - and sadly a nasty bottom end knock :mad: ( the tiniest lick of oil in the site glass when bike lent over towards it 😩)...
  2. Honda CBR 600
    ok so a buddy of mine bought a 99 CBR 600 F something and brought it to me to check out from what I can tell the clutch is no fully engaging the bike runs good but barely moves he told me the guy the he bought it off of said it ran good before he changed the clutch cable then it started doing...
  3. General Member Classifieds
    Selling my 99's 16" OEM front wheel. It can go with or without the rotors, priced accordingly. ** has rash** The bike went down on the left side, and I cleaned up the outer most part of the rim, then hit it with some black rattle to keep from corroding. It's a clean rim, and the rash is now...
  4. Site Help and Suggestions
    Hey guys, having a bad day just found out my charging system is not functioning correctly AGAIN :( , recently I've bought new and changed out the stator & regulator/rectifier and it ran perfect... But today I was riding and my gaudge fuse blew out I checked my connections from my stator to the...
  5. Honda FireBlade
    Hey guys, anyone know what the piece that attaches to the choke cable and carbs is called that opens the choke and where to get one? I can't seem to find mine, and now it's getting cold I will definitely need it lol
  6. General Discussion
    I have a 99 blade, and today on my way home, sounded and felt just like I had a dead cylinder. Checked spark plugs and coils, all have spark and work, all cylinders have compression, what else could it be???
  7. New Member Introductions
    Hello there everyone. Some of you may already know me from my coolant flush thread(Thank you to all those who offered advice) but i'm sure most do not. I can finally introduce myself properly as my poor bike was in bits. Can't have an intro without pics now, can I?:nono: :smilebig: Already...
  8. Honda FireBlade
    i am having a few problems with my cbr 900rr 1999 , the bike is not idling, and its shooting flames , it does not even turn on properly my fuel cork was modified and i dnt know to to make the breather work properly :idunno: this was the problem before i managed to get it fixed but it was...
  9. Wanted
    I have ordered some aftermarket brake rotors but since only one of mine is warped Im wondering if anyone in the same situation wants to part with there unwarped stock rotor ? Trying to keep the bike as original as possible - or at least have all original parts to offer if I ever sell her !
  10. Aftermarket Perfomance Parts Reviews
    Hey, don't know if this is a repost, couldn't find anything so sorry if it is... I just bought my first blade it's a 99 with 10,000kms on it roughly 6,000 miles. It has a full yoshi exhaust and dyno jetted. I would like to add some reliable performance should i change the gearing? what should...
  11. New Member Introductions
    Howdy Peeps, New to the site so just introduce myself. I'm Liam aka leez. Just got back into riding after a serious accident at the end of last year. Lost a beautiful X11 and broke my hand and fractured my spine. But recently got a beautiful 1999 cbr600 FX and loving the riding again. Well...
  12. Wrecked Motorcycle Photos & Stories
    Im going to start this story about 4 weeks ago so you can tell how shitty this really is. Here we go. 4 weeks ago I decided Im gonna repaint my 99 cbr 900rr. good. so I did the bondo thing. it was my first time. really screwed up all up. so after 2 weeks of dicking around with bondo and spray...
  13. Honda FireBlade
    My 99 900rr's fan doesnt seem to kick on till around 221 degrees. Out of fear of ruining the engine from the heat I decided to add a manual fan switch. What you'll need.. wire cutters/stripper 10 inches of wire (Bigger is better. I used scrap 12 gauge from different project.) 1 wire tap-in 1...
1-13 of 13 Results
Top