Honda Motorcycles - FireBlades.org banner

954rr

  1. General Discussion
    Ok so I pull the engine off my 02 954rr to repair the transmission and figured I would go ahead and completely disassemble the the engine to inspect the pistons and bores while I had it apart. I found a lot of scoring on the cylinder walls and piston skirts so I washed and cleaned everything up...
  2. General Discussion
    Hi everyone, diagnosing a charging fault (reg/rec), and wanted to share a whistlingnoise my blade has been making intermittently at idle, up to 1500 - 2000rpm. Sometimes goes away after a rev of the engine. Thinking a pinhole in a hose or possibly the stator. Yet to remove the cover to...
  3. Motorcycles For Sale
    I have this awesome 02 954RR for sale, 34k mi. Brand new tires, brakes, and twin DEVIL stainless and carbon fiber exhaust. Tune up and oil less than 50mi ago as of Mar 2020. I am looking to get into something else now is the ONLY reason I'm even thinking of selling it. Fcfs/no trades/$3500...
  4. Honda FireBlade
    Hello. My 954rr suffered from spun crankshaft bearings. After I got the crank polished and balanced and the head polished and serviced it is now time to put it all back together. But before I do that I want to clean the lubrication system, does anyone know a good way to clean out shrapnel from...
  5. Honda FireBlade
    Hello guys! After recently starting to lose oil pressure I decided to disassemble my engine. I discovered that the crank bearings were destroyed as well as the crankshaft itself was roughly scratched. There were also massive scratches on the cyllinder walls. Cylinder 3 and 4 valves were pitch...
  6. General Discussion
    Hello! I have a 2002 954rr and I need a little help. When the bike is warm (80 degrees celsius and above) and idiling the oil pressure light starts to flicker on and off like a christmas tree. As soon as I give even the smallest amount of throttle the light disappears. The bike's idle is kind...
  7. General Discussion
    Hello guys! I have a 2002 954rr which I,ve had for a bit over a year now. The cam chain has rattled when the engine is cold ever since i bought the bike, but just before winter it also started making valve noise. So I took the bike apart during winter, adjusted the valve clearances and swapped...
  8. General Discussion
    Hey Fireblade Family! It's been a while since I've posted on this forum. Life has happened and I hardly even have time to ride anymore. To add on that, I recently got wrist surgery and my rehab time will be very long. Realistically won't be able to turn a throttle until April/may, which is...
  9. Honda FireBlade
    Hi All!! So I've seen a few threads with this question but answers were sort of vague. I'm living in Germany right now and have an opportunity to buy a gorgeous Euro Spec Repsol 954rr. I have always wanted a FireBlade and this is so perfect. However, I don't want to tease myself with it if I...
  10. Honda FireBlade
    Can i convert my 02 Honda cbr 954rr headlight assembly to a newer cbr 1000 assembly? Reason for doing this is that im wanting to use a specific headlight projector assembly that is only sold for the 1000 and a few 600s.
  11. Honda FireBlade
    Hey Guys, I have a 2002 Honda CBR 954RR Fireblade and my 4th gear is out and was wondering how much it would cost to replace, or is it simply enough where I can replace it myself instead of a shop? It does shift into 4th gear til about 4 or 4500 RPM then it shifts down to 3rd gear on its own, so...
  12. Honda FireBlade
    Hi, So, my bike has 16k miles on it and has been meticulously been cared for. But a few days ago I noticed that after either accelerating or downshifting, when the RPM are at 4000, I hear a strange noise. Not knocking, grinding, or rattling, but like a muffled metal to metal rubbing. The next...
  13. For Sale
    I have a 954rr motor that I would to part out. It was a running motor I used as a donor for my 929rr. A lot of it is still there besides the cams, cylinder head and throttle bodies. I purchased it from a guy who used it as some type of sprint cart so the lower case is pretty rough. I also have...
  14. Motorcycles For Sale
    Honda CBR 954rr Motorcycle - Ready to Ride! Located in Lula, GA - @ 20 min. North of Atlanta on 985 Needs Nothing! Lots of extra's included. It's fuel injected, has been very well taken care of and has just over 27k miles. At @ 25k miles, the oil was replaced w/ full synthetic oil w/ K&N oil...
  15. General Discussion
    Which bolt do I unscrew to get the coolant draining on my bike could please send a detailed picture of which bolt because I'm lost or a video would be better
  16. Wanted
    lowsided my 954rr. same exact damage to the bike as the first time it fell from when the front tire hit gravel. so now i have two OEM right fairings with some scrapes and 2 small holes in them. FRAME SLIDERS ARE INCREDIBLE. So, i'd love to buy a third OEM fairing to bring my bike back to its...
  17. General Discussion
    So I've had a blast on my 954rr for the past year+. I bought it late last March with 4500 miles on it, and she now has 13.7k miles. I've noticed that she puffs a little smoke when revved hard at a stop, but after the first or second rev, the smoke stops. This is different from the dark smoke...
  18. Wanted
    Looking for any slip on for my bike. Preferably in good condition with hardware. Please PM me with any pictures you have and details of the slip on. Will pay for shipping and am willing to meet up within 1-2 hours. Preferred method of paying would be paypal. Im located in the Colorado...
  19. Honda FireBlade
    Hi there again guyz; I search nearly all forum but couldnt found anything about this situation i got a broken mid-pipe header out. And i find a part for my exhaust and weld it to the out of mid-pipe. Now i'm using a yoshimuro GP-Force series tube with it. The problem is, i wanna buy the OEM...
  20. Honda FireBlade
    Hey guys, I just bought an '02 954rr last week. I've taken it apart and am going through the bike to make sure fixes were done properly by the previous owner. While installing frame sliders, I noticed the bike has a gap between the frame and the engine case on the right side where the frame...
Top