Honda Motorcycles - FireBlades.org banner

carb

  1. 99 cbr 900rr Fueling options for syncing carb

    Honda FireBlade
    Ok, I am about at my wits end with this bike because of how damn awful impossible it is to find EVERYTHING for it. Turn signals, mirrors, headlights assemblies, ignition modules.... I spend more time researching how to fix it than I have riding the got danged...
  2. 99 900rr choke parts

    Honda FireBlade
    Hey guys, anyone know what the piece that attaches to the choke cable and carbs is called that opens the choke and where to get one? I can't seem to find mine, and now it's getting cold I will definitely need it lol
  3. After jet kit install 600 f2 wont start and run.

    Honda CBR 600
    I installt a 6sigma jet kit on my 94 600 f2 and after placing the carbs back on, the bike will onlt start with carb fluid but runs very poorly. Did I fudge up the fuel/air mixture with the pilot screw? Or did i fudge it somewhere else? every time I hit the throttle it dies immediately... :confused:
  4. Need help,carb backfiring on 98 cbr 919rr

    Honda FireBlade
    So i just got done rejetting my 98 cbr919rr,and hooked it all back up and was about to use the motion pro carb synchronizer,I had the fuel line hooked up to a fuel funnel and had the motion pro set up,started the bike and let her run,she started to run pretty high into 3500-4000 rpms and the...
  5. NC23 won't rev over 8-9krpm...

    Honda CBR400RR
    Hi! Newbie here, Swede :) Just bought a CBR 400R Aero-87, NC23 engine. Vacuum carbs. It won't rev over 8-9k. The vacuum throttles sticks vibrating on 50% open. If I lift them manually i get a smooth 14krpm. Cleaned the carbs, checked the diaphragms and all is fine. Suggestions on next step? Fuel...
  6. air inlet cleaning

    Honda CBR400RR
    is there any way of cleaning the air inlets that run through the carbs to the jets, like the brass inlets that are by the air filter, ive blasted them with carb cleaner and compressed air but still feel like theyre a bit clogged, cant get them out and soak them or anything, and the passage isnt...
  7. I need carb parts!!!!!!!!!!!!!!1

    Honda CBR 600
    So where can i find the 4 black rubbers that go on the carbs and mate to the velocity stacks? please help!!!
  8. Carb Rebuild Help...90VFR750F

    Honda Interceptor / VFR
    I'll start this off by saying I'm new to working on my own gear but have good, knowledgeable friends helping. And manuals. I have all of the resources to find the parts now...but I'm getting mixed advice on what I'll actually need. Carbs are gummed up slightly, was in running condition (just...
  9. 90VFR carb rebuild kit?

    Honda Interceptor / VFR
    Just bought and tore apart my 1990 vfr 750 only to find some gummed up carbs. Where do I order / find a rebuild kit? I need an inexpensive starter motor as well, it's working intermittantly. I'm new to this so any suggestions would be greatly appreciated.
Top