Honda Motorcycles - banner


  1. Replacing front forks seals on upside down forks without any special tools!

    How To Articles
    Hey guys, as part of my video logs with my track bike I replaced the upside down front fork seals on my 929 fireblade but this approach can work for most upside down forks so thought it was worth adding to this section. First video you might want to skip forward a little bit to get to the...
  2. 2015 Fireblade Forks

    Honda FireBlade
    Can anyone help. I just bought this bike. I found that when ever I hit even relatively small bumps in the road the front forks knock loudly as if they are bottoming out. Is this likely? What's the best way to test for this and if it is happening what's likely to be the cause / remedy. The...
  3. cbr900 rrw setting

    Honda FireBlade
    Hi there, am new on here. I have got myself a 1998 blade. It is fitted with a Hagon rear shock and standard front Showa forks. I have searched forum history but I couldn't find what I need. I am looking for a base setting but nowhere can I seem to find one for the Hagon rear. I use it for...
  4. Nighthawk Front Fork Swap

    I recently purchased a 1986 nighthawk 700s and i am very determined to swap the front forks and triples with inverted forks. With that said, can anyone help me with figuring out which streetbike front end i should use? I was thinking of sometype of CBR.... Thanks homies! Brax
  5. Rear Suspension Overhaul

    Honda FireBlade
    Hi Guys, I'm new to posting on this forum but have used it as a very useful resource for years. Couldn't find what I was looking for so here goes, My first post! Background: I have a 1997 CBR900RRV with 23,000 miles on the clock, 21k which I have run up myself (so I know the abuse it has had!)...
  6. NC29 Fork Slider Split

    Honda CBR400RR
    Upon re-installation of my front wheel, I had problems fitting the pinch bolts back in. Whilst tightening the bolts, the left hand fork slider cracked around the area where the bolts are fitted. Is it possible to replace just the fork slider or will I need to replace the enter fork? And if so...
  7. '12 cbr1000rr front fork issue

    Honda FireBlade
    Hey there guys , I have a '12 fireblade with about 11000 km on it and unfortunately I got a leak of fork fluid on the front right fork so I decided to replace the seals on both sides cos I know they are the ones that are damaged ... Now the issue I'm facing is that the forks are brand new forks...
  8. FORKS

    General Discussion
    I have a CBR 900rr 96 i need to replace my forks on the bike but i would like to put the 929 forks on it is it possible to do this if not what could i convert the front end too?
  9. Fork seal question

    Articles: Honda FireBlade
    I'm new here so I'm sorry if this has been answered. I read a great write up on how to do the seal change but I was wandering if anybody has a home remady for any tools needed that are not standard tool box items. Also I'm 5'10" and 220 lbs. should I change from factory specs on my adjustments...
  10. CBR900RR (Front End Wobble)

    General Discussion
    Hello, Hope everyone is doing well. I have a problem with my 95 CBR900RR. It has a front end wobble. The person I brought it from road it with a bad leaking fork seal. I brought a MOTION PRO SEAL MATE Tool to Fix Leaking Fork Seals. It cleaned it up great and no more leaks. I recently moved my...
  11. Forks

    Hey Guys looking for honda 929/954/rc51/60rr/1000rr forks for a front end conversion on a honda 919. Let me know if you have any forks I can take off your hands for you. Or if you have a front end that you want to sell. Thanks -Adam
  12. Will CBR1000RR6 Front End go on a CBR893RR?

    Honda FireBlade
    Hi guys, I have recently thrown my RR6 down the road and after it hit the curb and landed on the grass, it stood to its side looking at me, fuming from anger, as the engine casing split open allowing the hot oil gases to evaporate and the frame cracked in many pieces. Luckily the idiot riding...