Honda Motorcycles - FireBlades.org banner

petcock

  1. Wanted
    Quote me on the part or lead me to a company that will ****ing work or at least guarantees the parts... I have gone through THREE PETCOCKS since i bought this bike less than a year ago. Just point me to one that will work.
  2. Honda CBR 600
    Ok recently i replaced a missing spring on my f2 because it was leaking fuel into the engine hydro locking it severely. now when I run the bike it leaks through the vent and covers my left foot with gas so I am hoping that someone here can point me in the right direction for a fix or a rebuild...
  3. Honda CBR 600
    I have a 92 F2 that I recently bought and have encountered an issue with the fuel tank. While riding I ran out of gas despite the petcock lever being in the "on" position. I got gas to make it to the gas station and filled up the tank. I got home and put the bike in the garage, noticing the...
  4. Tools / Garage / Paddock
    Good day gents and ladies I bought a second hand '92 Blade earlier this year, then discovered it was a rebuild. That isn't a problem, just an insurance issue. My real question is this: The petcock leaked last week (turns out it had been 'repaired' previously, but not properly). It was a...
  5. General Discussion
    I had a minor crash lost front fairing along with light and the gauge chasis, anyhow I lifted it again took time to start and it sputtered and then it was good. rode it every day for a week. then for 3 days in a row when I start it, it turns fine even without choke at all perfectly but when I...
  6. Honda FireBlade
    Since the fuel pump is dead, would it be possible to run the bike on a petcock? I only thin I would do this as a temp solution until I get a new pump going. Has anybody done this on an injected bike?
  7. Honda FireBlade
    ok so I just got a 900rr that im trying to more or less restore to its original glory, but it needs a little tlc. First, its missing some of the tubing from the fuel system. One of these I know is the breather tube coming from the fuel tank. In the OEM parts diagram, it goes from the fuel tank...
Top