[wiextreme]

Please Help me anyone...

I have problem with my 954 turn on key acc problem..
when i put the key and turn it to ON position, the gauce (speedometer) light and number does not coming out.. but the HISS led are normal..
I have check all of the fuse are normal (inside front seat)
before i got these problem the bike is normal.

I have post the video on these link:

thank to everyone whos share your experience. many thanks..

 

[wiextreme]

is that posible with my ECM ?
can i replace any used ECM on ebay to fit with it?
thx..

 

[bladeracer]

Please Help me anyone...

I have problem with my 954 turn on key acc problem..
when i put the key and turn it to ON position, the gauce (speedometer) light and number does not coming out.. but the HISS led are normal..
I have check all of the fuse are normal (inside front seat)
before i got these problem the bike is normal.

I have post the video on these link:
Honda cbr 954 turn on acc problem - YouTube

thank to everyone whos share your experience. many thanks..

But it starts and runs fine?

 

[bladeracer]

is that posible with my ECM ?
can i replace any used ECM on ebay to fit with it?
thx..

You would need a HISS ECU with it's matching key.

 

[wiextreme]

But it starts and runs fine?

the bike is no have any problem before.. so weird.. i really confuse with that problem..
i turn the key on and off repeatly i got no light show-up on speedometer

 

[wiextreme]

You would need a HISS ECU with it's matching key.

but I do not need to replace a set of new keys with his ECM?

 

[bladeracer]

the bike is no have any problem before..

I mean it runs fine now - your only problem is the lights don't work?

 

[bladeracer]

but I do not need to replace a set of new keys with his ECM?

It's up to you whether you replace the keys but I wouldn't bother.
All you need is the chipped key that is coded to the ECU you buy. If you keep it on your key ring then it will trigger the HISS and allow you to use your existing keys.

 

[wiextreme]

I mean it runs fine now - your only problem is the lights don't work?

i cant even to start my bike because when the key i turn to ON position, i got no sign (light,neutral light,odo digital number,etc) to light up..
is it posible wrong with my ECM?

It's up to you whether you replace the keys but I wouldn't bother.
All you need is the chipped key that is coded to the ECU you buy. If you keep it on your key ring then it will trigger the HISS and allow you to use your existing keys.

oh ic. is mean posible i can bought only the ECM on ebay.. ic.. thx for the information..

 

[bladeracer]

i cant even to start my bike because when the key i turn to ON position, i got no sign (light,neutral light,odo digital number,etc) to light up..
is it posible wrong with my ECM?


oh ic. is mean posible i can bought only the ECM on ebay.. ic.. thx for the information..

Does the fuel pump prime when you turn on the ignition?
Is the battery charged up?
Have you tried jumper cables to a car battery?

 

[wiextreme]

Does the fuel pump prime when you turn on the ignition?
Is the battery charged up?
Have you tried jumper cables to a car battery?

fuel pump does not prime, just because it was no electrical going on after i turn key to ACC-ON position... so strange..
here i just upload video:

 

[bladeracer]

fuel pump does not prime, just because it was no electrical going on after i turn key to ACC-ON position... so strange..
here i just upload video:
No power ON key ACC CBR954 - YouTube

There is power to the HISS light and sensor though?
Unfortunately I can't think of anything other than a broken wire or connector in the harness perhaps, or maybe the base of the ignition switch.

 

[wiextreme]

yes, the HISS light is goin ON normally..
im just replace the new battery yuasa 12v 9ampere and nothing good..

 

[wiextreme]

Problem Solved!... wired cut-off cause by wreak harness itself.. thanks in advance sir Bladeracer..

 

[dazodiac]

BladeRacer's a boss lol