Honda Motorcycles - FireBlades.org banner

1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
So I got side swiped on a round about today, and of course the guy sped off and no one got plates. The bike went down, without too much damage. The left side stator cover did crack though, almost entirely. As I was taking it off though, I noticed that the actual frame itself was also cracked (see picture). I know that the cover can be welded, but is that the best option for this as well? Any suggestions would be much appreciated, thank you.
 

Attachments

·
Premium Member
Joined
·
32,034 Posts
So I got side swiped on a round about today, and of course the guy sped off and no one got plates. The bike went down, without too much damage. The left side stator cover did crack though, almost entirely. As I was taking it off though, I noticed that the actual frame itself was also cracked (see picture). I know that the cover can be welded, but is that the best option for this as well? Any suggestions would be much appreciated, thank you.

Very common problem with the 929/954 engine. Have a welder look at it but very often it's repairable.
 
1 - 2 of 2 Posts
Top