Honda Motorcycles - FireBlades.org banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1 (Edited)
-- 929/954 front rotors. They are 4.5mm thick (3.5mm min) and straight. The picture only shows one but the other is in the same condition (it was mounted on the supermoto project at the time of the picture). $110




-- 929/954 front wheel (no rotors) there is a mark on one side where something rubbed against it while in storage and some rash on the lip of the other side $130
-- 929/954 rear wheel with cush drive, rotor, and race slick $160









-- 600rr front wheel and rotors. There is some light surface rust forming on the rotors from sitting on my wheel rack for the last year. The tire on the wheel is cracked and has goofy wear so it's only good enough to keep a bike a roller. Tire needs to be replaced before going for a ride. $220

 

·
Registered
Joined
·
185 Posts
Looking for set of 929 wheels and rotors, no tires. Whole set.
LMK what you can do on price for both front and rear...provided they are straight ( bound for a racebike so wheels and rotors must be straight)
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top