Honda Motorcycles - FireBlades.org banner
1 - 2 of 2 Posts

· Registered
Joined
·
3,963 Posts
1/4"???
rotate the sprokets to the tightest place on the cog, then try to push the chain up twards the swingarm. If it hits, it's too loose. If it is within a half inch or closer to the swingarm without touching, you're fine.
I thought it was about 1 1/2". Go figure.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top