Honda Motorcycles - banner
1 - 1 of 1 Posts

· Registered
868 Posts
Have you removed your stator cover before? Did you use a torque wrench when re-installing the stator cover? If not you/previous owner could have warped it by overtightening the bolts. Remove it and use a straight and check the cover to make sure it is straight. A new gasket will not fix a bent cover. A bent cover can be fixed with a little work with a file and some sanding?

As for the valve adjustment if you don't hear anything knocking you will probably be wasting your money. Unless you can do it yourself you will be out several hundred dollars for a dealer or mechanic to check them to most likely tell you everything is fine.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.