Joined
·
125 Posts
i dont like the polish pipe on my bike im think of painting it i know that i need 2 sand it and take the rivets out of both ends :crying:but i dont want a exhaust leaks :thumbd:got any ideas or help
a bit of help
Join the discussion
Recommended Reading
-
96 fireblade 900rr factory dogbone length?
Honda FireBladeDoes anyone happen. To know the factory length of the rear shock dogbone from outside end to outside end?- 0
- 6
-
Jerry1991 · updated
-
When To Replace Cam Chain Tensioner?
Honda FireBladeHello All, Bike is a 2006 'blade with ~ 17000 miles. Per the title, looking for some input with this. I've been riding with the 'rattle' for several hundred miles now, and have finally decided to address it. I've got all the fairings off and listened with my ear beside the housing when...- 4
- 79
-
954rr Tank Dent
Honda FireBladeI have my tank off the bike for maitenance purposes. I inherited the bike with a dime size dent on the top left side of the tank. It is a very shallow dent. I have the silver/black paint scheme and the dent is in the silver so it is hard to notice but it bugs the hell out of me. I talked with...- 13
- 174
-
96 900rr lowering issues
Honda FireBladeI recently purchased the bike and the last owner was very short and had the bike lowered alot but the adjustable link is turned all the way in so I can't take it no higher the off thing I am wondering is did they turn my triangle bracket around different than the way it is supposed to go I don't...- 5
- 54
-
Jerry1991 · updated
-
CBR 900RR-V Build/ride Thread
Honda FireBladeHi All I'm new to this forum and thought it would be nice to put some of my blade picture into one place. I owned the blade for around 4 years, purchased it off a friend who dropped it on his first ride out (Low sided) Please see the picture below when I bought it and after I repaired it...- 80
- 879
Join now to ask and comment!