Honda Motorcycles - FireBlades.org banner

1 - 8 of 8 Posts

·
Registered
Joined
·
1,375 Posts
Discussion Starter #1
When I purchased my bike, it didn't have front turn signals. No problem, I intended on adding the euro-style ones that go in the corner of the headlamp anyways. So I installed the bulbs, then it occurred to me, I have no idea where the wires go. I took a look around the front end and found these plugs on both sides that I would assume go to the signals, I just want to make sure before I cut into them


I'm guessing it's the yellow plug for left signal and blue for right. Can anybody confirm this for me?
 

·
Registered
Joined
·
567 Posts
When I purchased my bike, it didn't have front turn signals. No problem, I intended on adding the euro-style ones that go in the corner of the headlamp anyways. So I installed the bulbs, then it occurred to me, I have no idea where the wires go. I took a look around the front end and found these plugs on both sides that I would assume go to the signals, I just want to make sure before I cut into them


I'm guessing it's the yellow plug for left signal and blue for right. Can anybody confirm this for me?
Yep and the solid colors are the actual wires for the flash function, the striped ones are for constant illumination.
 

·
Registered
Joined
·
1,375 Posts
Discussion Starter #8
Looks good. I was hoping there was a kit for 929, but no such luck. :(
do you not have a spot you can drill on the back of your headlights to put it? You just basically need to epoxy the little led lights into a hole you put in the back of your lights
Thanks, I ordered one.
no problem man. Enjoy, I love mine
 
1 - 8 of 8 Posts
Top