Honda Motorcycles - FireBlades.org banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,836 Posts
You are correct on all. Two cylindrical filters under the cover. To remove the shelter, you must remove the seat which has two fasteners under the back corners when you pull them back a bit. Just lots of screws on the housing cover. Also remove the temp sensor connector on the cover. Clean well and be sure the filters are seated properly.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top