Honda Motorcycles - FireBlades.org banner
1 - 3 of 3 Posts

· Registered
Joined
·
240 Posts
Discussion Starter · #1 ·
it seems like the clutch switch on my 929 has gone bad - it'll no longer start in gear, even with the clutch in. is there anything wrong with just connecting the two wires that go to the switch?
 

· Registered
Joined
·
240 Posts
Discussion Starter · #3 ·
There's no adjustment that I can see. I pulled the lever off and it's a fixed part of it that pushes on the switch, so I don't see how I can adjust it.


I'm aware that it's there for a reason, but I've bypassed them on plenty of other bikes with no problems.
 

· Registered
Joined
·
240 Posts
Discussion Starter · #5 ·
No problem with just connecting the wires. It still won't crank unless in neutral. Only problem is if you stall motor in traffic or something and you'll have to go back to neutral to start.
What? Is there a specific resistance needed or something?

What I know for sure right now is that it needs to be in neutral to start.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top