Honda Motorcycles - FireBlades.org banner
1 - 5 of 5 Posts

·
Registered
Joined
·
217 Posts
Discussion Starter · #1 · (Edited)
My 2008 CBR1000RR Fireblade has now run above 12.000 km and I have just completed doing the the Oil Service.

Following this I have prepared the first of a series of Do It Yourself (DIY) articles on the 2008 Fireblade.
Here is a link to the first article titled Lower Cowl - Removal/Installation - CBR 1000RR DIY.

I hope this article will be of help for other Fireblade owners, and I hope it will inspire others on this great forum to contribute with DIY articles also.

Cheers ... Fred :)
 

·
Registered
Joined
·
217 Posts
Discussion Starter · #3 ·
No - I have not yet done any DIY on mid fairings and tail. If you have not yet bought the Honda Shop Manual, then I suggest to do so. It is a very comprehencive manual with lots of drawings and pictures. But it is for profs, so it lacks descriptive texts and explanations. This is the gap I try to fill with my DIYs.
:) ... Fred
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top