Honda Motorcycles - FireBlades.org banner

1 - 4 of 4 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter #1
On there website they talk about modding the AirBox Flapper and the RAM air ducts. Any one try this here? I was wondering what you did, and if you noticed improvement.

http://www.hardracing.com/Misc/929Info.htm

I'm just curiouse. It's not like I can use all my HP right now how I ride, but maybee in the future with more experiance...
 

·
Registered
Joined
·
3,599 Posts
They also say that the 929 comes with a full Ti system

There's no such animal as a stock 929 with RAM air. Or a 954 for that matter. Or a 1000RR, apparently.
 

·
Registered
Joined
·
8,271 Posts
Taz installed the Hard Racing 'RAM' Air (or an equivilent) and thought it made an improvement. This is really been discussed at length in the past, but basically boils down to the Blade liking some additional 'Cool' airflow, as the stock 929/954 get their intake air in a rather warm place.
 

·
Registered
Joined
·
1,524 Posts
I put their ducts on with Sharkskins so I had to trim them a tad. I also did the flapper mod (trimmed all the useless plastic and posts off the lower part of the box as well since I bought another airbox). With it all in place and their map it runs well, no dips etc. I do have an Erion exhaust on it too.
 
1 - 4 of 4 Posts
Top