Honda Motorcycles - banner
1 - 1 of 1 Posts

· Registered
146 Posts
Could do with some good tips here......or advice.....:rolleyes:
I have an EvoTech Tail Tidy on my 08. The detailed instructions with photos that came with it are pretty good and would apply to yours as far as removing the stock parts. The only thing that I did differently from their instructions was I removed the cowl trim piece first before removing the 4 bolts that hold on the seat lock. The instructions say to do it the opposite but then it's nearly impossible to get to 2 of the 4 bolts if you try it that way.

EvoTech Tail Tidy Instructions

One thing that helped me when I was putting things back together was to put a bit of grease on the tabs that interlock. It seemed to make them easier to slide back in place.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.