[jukkamoilanen80]

Hi,
I can't seem to find PC3 free download maps for 929 Blade. If someone have a working link to the page I would apreciate a lot.
Didn't find any on powercommander.com. Is it just too old both, PC 3 and the bike..?

Second question:
Are injection nozzle's same in -07 blade and -00 blade? The PC 3 that I am looking have been in -07 blade.

Thanks

Jukka

 

[COBRA90GT]

It's because of the age of the PC3 units; DynoJet views the PC3 unit as a "legacy" device (likely the PC5 unit as well since DynoJet has been pushing their PC6 device as of late) so the PC3 maps are basically "ancient" now.

You might get lucky if someone saved the PC3 files from Dynojet's website and sees your thread/post - believe the 929 and 954 bikes had very similar map files for the PC3 so you might be able to work with either one (or the PC3 units were interchangeable with either bike, I forget exactly).

Also try running a search to see if someone posted the 929 PC3 map files in a thread or linked them to their own personal website (?). G'luck !

 

[Smoke4ndMears]

Tunes | Dynojet

Select your vehicle to access tunes or you could download the Powervision tunes.

www.dynojet.com

68 tunes available.

 

[jukkamoilanen80]

Tunes | Dynojet

Select your vehicle to access tunes or you could download the Powervision tunes.

www.dynojet.com

68 tunes available.

Thanks!
Unfortunately my old girl have Vans & Hines slipon, K&N air filter and the "flaps" are eliminated. No map for that. It has to be exact to work properlly, I think?

 

[oldbastard]

I have some maps for a 929 in various states of tune, one will probably be close to what you need. You don't really need to get it setup on a rolling road, even if you could find one that can communicate with PC3s. Instead what I advise is to get a lambda sensor installed in the exhaust close as possible to the 4-1 connection and use that to tell you the air-fuel ratio. Then you just need to calibrate the throttle twistgrip in 5 or 10% increments. So then you can find a long straight road and try out various throttle openings and see what a/f ratio you have For full power you need to be around 12:1. If not then you can modify the fuelling map for that rpm and throttle opening. I'm fortunate enough to live not far from Germany so speed limits are not a problem.

 

[NordicusMaximus]

Hi,
I can't seem to find PC3 free download maps for 929 Blade. If someone have a working link to the page I would apreciate a lot.
Didn't find any on powercommander.com. Is it just too old both, PC 3 and the bike..?

Second question:
Are injection nozzle's same in -07 blade and -00 blade? The PC 3 that I am looking have been in -07 blade.

Thanks

Jukka

I think I have the Original PC3 CDROM, let me go check in my garage.

 

[NordicusMaximus]

I think I have the Original PC3 CDROM, let me go check in my garage.

Nevermind, its the PC2 CDROM that I have

 

[jukkamoilanen80]

Okay, thanks anyway

 

[jukkamoilanen80]

So I bought the pc3 to my 929cc. Got very good deal. I think I try to download close to my bikes setup program on it and (there wasn't any Vans & Haines slip on) give it a go. What you guys think is doomed idea? I asked for tuning to my bike but here in Finland it is 390€ and I paid my bike 1600€ 😄 Thats why I bought pc because it has empty area in low rpm's and would like to get rid of that easiest and cheapest way possible 😄

 

[oldbastard]

So I bought the pc3 to my 929cc. Got very good deal. I think I try to download close to my bikes setup program on it and (there wasn't any Vans & Haines slip on) give it a go. What you guys think is doomed idea? I asked for tuning to my bike but here in Finland it is 390€ and I paid my bike 1600€ 😄 Thats why I bought pc because it has empty area in low rpm's and would like to get rid of that easiest and cheapest way possible 😄

I have a load of .map files for the PC3, but this site doesn't allow that file extension. Can send them by email, but it's up to you...maybe contact the moderator, perhaps there are options

 

[jukkamoilanen80]

I have a load of .map files for the PC3, but this site doesn't allow that file extension. Can send them by email, but it's up to you...maybe contact the moderator, perhaps there are options

View attachment 110927

Hey thanks a lot. My email is [email protected]

 

[jukkamoilanen]

I have a load of .map files for the PC3, but this site doesn't allow that file extension. Can send them by email, but it's up to you...maybe contact the moderator, perhaps there are options

View attachment 110927

Hi, did you sent to my email any? I haven't noticed and tryied to check junk mail too..

 

[oldbastard]

Hi, did you sent to my email any? I haven't noticed and tryied to check junk mail too..

Sorry, been rather busy. Will do it tonight.