Honda Motorcycles - FireBlades.org banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hiya please can someone help me find the Engine diagnostic light sequences for a honda fireblade 929/ rr1...or possibly a good website link I can get it from please for my friends motorbike that keeps flashing ?
It flashes nine times thats any help
We would be very grateful for your help .
Thanks
 

·
Registered
Joined
·
270 Posts
Hi and welcome

Have a search of the site and you will find lots of information, you would have been better to post this in the fireblade forum.

• The PGM-FI MIL denotes the failure codes (the number of blinks from 0 to 35) . When the indicator lights for 1 .3 seconds it is equivalent to ten blinks . For example, a 1 .3 second illumination and two blinks (0 .5 second x 2) of the indicator equals 12 blinks. Follow code 12 on page 5-28) .



9 Blinks

•Loose or poor contact on IAT sensor
• Open or short circuit in IAT sensor wire
•Faulty IAT sensor

Hope this helps :welcome:
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top