[2002red954]

I was driving my CBR 954 today and the red light came on and the letters FI, what does this mean?

 

[Red Rider]

I was driving my CBR 954 today and the red light came on and the letters FI, what does this mean?

Is the FI light flashing? Count the number of flashes and look up the error code.
FI Codes 1
FI Codes 2

 

[2002red954]

Its not flashing it just stays lit.

 

[2002red954]

I checked it again and it flashes 3x1.3= 30 + 5 blinks equals 35. In the FI codes that Red Rider sent it said that it is a faulty EGCV and air intake valve servo motor.

What I was wondering is it all right to drive it like this and how do I fix it.

 

[ConqSoft]

The most common reason for that happening if you're just riding along, is a small rock or pebble getting lodged in the HTEV valve on the exhaust, that stops it from moving. It can eventually burn up the servo. Take the cover off the HTEV and see if a rock is in there.

 

[2002red954]

I don't want to sound stupid but where is HTEV valve on the exhaust?

 

[ConqSoft]

#35

http://www.ronayers.com/fiche/200_0384/muffler/muffler.bmp

There's a shiny cover on it that comes off with a few bolts. Check under there. (It's where the cables connect.)

 

[2002red954]

ConqSoft, I took apart the HTEV cover and a rock fell out. :thumb:
Thanks for the info, I don't know what I would do with out the internet.