Honda Motorcycles - FireBlades.org banner

1 - 5 of 5 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter #1
Bike is an '03 954 -- 6700 miles.

I get bad, bad squealing when coming to a stop. Doesn't happen when speeds are above 10mph or so, but during that final slowing, they just hum/squeal until the bike is stopped.

The wear indicators are fine and it looks like there's plenty of meat left on the pads.

Any ideas? :idunno:
 

·
Registered
Joined
·
12 Posts
Smear a little copper grease on the backs of the pads (don't get it on the friction material, disk or rubber seals).

A quick rub over the contact area on the disc with some fine grade wet/dry finishing paper will also help.

BTW, are they EBC pads by any chance ?
 

·
Registered
Joined
·
347 Posts
also can try some hard braking to de glaze the rotors and pads. good advice on the copper grease, and permatex also makes anti-squeal grease which o've had great experience on cages with.
 
1 - 5 of 5 Posts
Top